Installed on a Monkey 125, which leans forward a lot compared to the OEM.
The mounting holes are open for easy replacement, and the wires are large and sturdy as OEM, although there is some excess.
- Giảm giá
906,283 VND (5,142 JPY) 950,345 VND Save 5%
Webike Point: +51 pt
(8,989 VND)
Thông Tin Giao Hàng
-
Please select product form first.
Tương thích
HONDA
Xem bảng thông tin Dòng xe phù hợp
-
glom
13-15 JC61 (up to 1300000)(60mm down 95mm forward)
-
glom
16-17 JC61 (1300001)(40mm down 65mm forward)
Mô tả sản phẩm dưới đây được tự động dịch bởi Google.
Chi tiết sản phẩm
Type: Switch hole machined
Outer Diameter: Φ22.2mm
Inner diameter: φ18mm
Total height: 85mm
Total width: 710mm
Position: 60mm down and 95mm forward
**Side caps for handlebar inner diameter Φ18mm are required separately.
*The color in the image is black..
.
The steel handlebar specially designed for GROM which is offset forward so that the grip position is lower but not cramped.
It can be installed with the stock cables.
Chú ý
* Nếu trong đó có bao gồm chỉ dẫn thì cũng được viết bằng tiếng Nhật.
Liên kết đến trang Model xe
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
khách hàng đánh giá
Reviews with image
Fits:HONDA glom 13-15 JC61 (up to 1300000)(60mm down 95mm forward), HONDA glom 16-17 JC61 (1300001)(40mm down 65mm forward)
Jan 12, 2022
Used on a Monkey 125. It leans forward quite a bit!
Helpful?
Fits:HONDA glom 13-15 JC61 (up to 1300000)(60mm down 95mm forward), HONDA glom 16-17 JC61 (1300001)(40mm down 65mm forward)
Sep 23, 2021
I appreciate that it's for Grom only.
No drilling is required as it is specially designed for Grom.
Without the Handlebar Stopper, it will interfere with the Cowl.
Position is leaning forward and I'm happy with it.
Helpful?
Fits:HONDA glom 13-15 JC61 (up to 1300000)(60mm down 95mm forward), HONDA glom 16-17 JC61 (1300001)(40mm down 65mm forward)
Jun 25, 2021
It's not a compatible model, but…
This is for the Grom, so the Monkey 125 is not a compatible model, but I was able to install it without any problems.
However, because cables are inevitably too much, the handling and adjustment are a little cautious.
Because the Riding Position of the MONKEY125 is more Upright than the Grom, and it changes to the Low Handlebar for the Grom, it becomes a considerable forward lean.
It's not too tight to ride, but you might have a more natural posture if you wear the Rear Sets.
Helpful?
Fits:HONDA glom 13-15 JC61 (up to 1300000)(60mm down 95mm forward), HONDA glom 16-17 JC61 (1300001)(40mm down 65mm forward)
Nov 26, 2020
Pre-drilled holes for pumping
And for all the Machines we've seen so far.
Go ahead and use the black paint.
I'm feeling a little weak.
I chose Black again this time.
Handlebar position has been changed.
The position of the brake master has been changed.
Strain on the brake hose.
Mirror position also needs to be fine-tuned
Position is certainly good.
It is similar to the Image in Separate handle, but
The overall width will be wider than NORMAL.
From OEM position
Forward, Low, Wide
But if I wanted to, I could change it to
Forward, Low, Tight
If you have all three.
I personally think it's better than that.
Helpful?
Fits:HONDA glom 13-15 JC61 (up to 1300000)(60mm down 95mm forward), HONDA glom 16-17 JC61 (1300001)(40mm down 65mm forward)
Apr 5, 2020
I was worried about the manufacturer and the shape, etc., when I replaced it, but
I ended up going with this one because I thought it would be a classic and a sure thing
Large It was correct (・ω・) b
Originally, it was too vertical and Seat shape issues
My butt was too sore to ride for an hour
This is a natural forward leaning position and works well with the Rear Sets, which makes the weight It's dispersed and looks like it could be a long ride!
It's also easier to bend because it's easier to put weight on
As expected of a dedicated product, the interference to the tank at the time of the full stare that I was worried about is also a perfect shape and position No problem with the relationship
I didn't want to add a Stopper to change the angle of cut as much as possible
It was very good
The quality is normal, but just before the famous Manufacturer of terrible quality I was looking at Handlebar for, so it seemed pretty good
However, the paint seems to be weak, and it was scraped off immediately when I installed it
It's a very good product for Total and I'm quite happy with it! (・ω・) b
Helpful?
New Custom Articles
