Ghi đông Forward Continental Type 2 Φ7/8

Fits:HONDA glom 13-15 JC61 (up to 1300000)(60mm down 95mm forward), HONDA glom 16-17 JC61 (1300001)(40mm down 65mm forward)

Used on a Monkey 125. It leans forward quite a bit!

Excellent

Jan 12, 2022

Installed on a Monkey 125, which leans forward a lot compared to the OEM.
The mounting holes are open for easy replacement, and the wires are large and sturdy as OEM, although there is some excess.

Used on a Monkey 125. It leans forward quite a bit...

Helpful?

Fits:HONDA glom 13-15 JC61 (up to 1300000)(60mm down 95mm forward), HONDA glom 16-17 JC61 (1300001)(40mm down 65mm forward)

I appreciate that it's for Grom only.

Excellent

Sep 23, 2021

No drilling is required as it is specially designed for Grom.
Without the Handlebar Stopper, it will interfere with the Cowl.
Position is leaning forward and I'm happy with it.

Helpful?

Fits:HONDA glom 13-15 JC61 (up to 1300000)(60mm down 95mm forward), HONDA glom 16-17 JC61 (1300001)(40mm down 65mm forward)

It's not a compatible model, but…

Very Good

Jun 25, 2021

This is for the Grom, so the Monkey 125 is not a compatible model, but I was able to install it without any problems.

However, because cables are inevitably too much, the handling and adjustment are a little cautious.

Because the Riding Position of the MONKEY125 is more Upright than the Grom, and it changes to the Low Handlebar for the Grom, it becomes a considerable forward lean.
It's not too tight to ride, but you might have a more natural posture if you wear the Rear Sets.

Helpful?

Fits:HONDA glom 13-15 JC61 (up to 1300000)(60mm down 95mm forward), HONDA glom 16-17 JC61 (1300001)(40mm down 65mm forward)

Pre-drilled holes for pumping

Average

Nov 26, 2020

Pre-drilled holes for pumping

And for all the Machines we've seen so far.
Go ahead and use the black paint.
I'm feeling a little weak.
I chose Black again this time.

Handlebar position has been changed.
The position of the brake master has been changed.
Strain on the brake hose.
Mirror position also needs to be fine-tuned

Position is certainly good.
It is similar to the Image in Separate handle, but
The overall width will be wider than NORMAL.

From OEM position
Forward, Low, Wide
But if I wanted to, I could change it to
Forward, Low, Tight
If you have all three.
I personally think it's better than that.

Helpful?

Fits:HONDA glom 13-15 JC61 (up to 1300000)(60mm down 95mm forward), HONDA glom 16-17 JC61 (1300001)(40mm down 65mm forward)

Japan User(translated)

Excellent

Apr 5, 2020

Exquisite Position

I was worried about the manufacturer and the shape, etc., when I replaced it, but
I ended up going with this one because I thought it would be a classic and a sure thing
Large It was correct (・ω・) b

Originally, it was too vertical and Seat shape issues
My butt was too sore to ride for an hour
This is a natural forward leaning position and works well with the Rear Sets, which makes the weight It's dispersed and looks like it could be a long ride!
It's also easier to bend because it's easier to put weight on

As expected of a dedicated product, the interference to the tank at the time of the full stare that I was worried about is also a perfect shape and position No problem with the relationship
I didn't want to add a Stopper to change the angle of cut as much as possible
It was very good

The quality is normal, but just before the famous Manufacturer of terrible quality I was looking at Handlebar for, so it seemed pretty good
However, the paint seems to be weak, and it was scraped off immediately when I installed it

It's a very good product for Total and I'm quite happy with it! (・ω・) b