Ghi đông thép Flat 2 Φ7/8 inch

Fits:YAMAHA TW225E 00- (Disc brake models) *Processing of switch hole is required|*It is necessary to change the throttle cable, clutch cable and brake hose., YAMAHA TW200 -99 (Drum brake models) *Changing the throttle cable, clutch cable and brake cable is required., YAMAHA TW200E -99 (Drum brake models) *Changing the throttle cable

Japanese Webike user

Very Good

Nov 17, 2020

No height at all.

I found a Handlebar that is as close to a single character as possible. I haven't found a Handlebar that is straight and single horizontal character.
This Flat Handlebar has a little bit of an angle to it, but it looks almost straight after it's assembled to the body. It is very cool that it is completely horizontal when viewed from the side.

If you're looking for a cafe style custom, I recommend it without question.
Personally, I think it's more rigid than the Separate handle, and I think it's the best in terms of practicality.

Helpful?

Reliable sense of well-established store

Excellent

Oct 6, 2016

Used to make KATANA Up Handle.

Actually I wanted Aluminum, but Polished's Plating is also good!

There is no indication that rubbing somewhat will come off, though there is impression saying that HandlebarCenter displays more easily, but polished American ticky KATANA is also good KanaNA wears itself and so on W

Reliable sense of well-established store

Helpful?

There is a difficulty in Cable routing for mounting in SR.

Excellent

Mar 27, 2016

As we installed the Large Screen on the SR 400, we are promoting low Positioning in order to make use of the windbreak rectifying effect to the maximum Large limit. First of all Handlebar and footpeg.

I can not say anything because I never really care about the quality of Handlebar, but I think the quality of Plating is good. The rigid feeling is also sufficient, but it is heavy accordingly.

Position of the bottom comes quite nicely. Pull is reasonable. Because this is only for each person by physique, it will not be very helpful ....

In case of attaching to SR 400 OEMWire kind can be used, but handling is quite severe. Especially decompression is hard and I think that I will remove it all the more.
Those who are attached to the SR think that it is better to think about countermeasures in advance. I will think about it from now on. Such troubles are really fun.

There is a difficulty in Cable routing for mountin...

Helpful?

Although purchased at first by the purpose of using Up-Handle-izing of 96 model CBR900RR, it attached to APE100 of a second Motorcycle by right-of-way change.Since
one also ran the APE like crazy, the Handle became lower than a NORMAL and the Corner

Excellent

Jun 25, 2012

Helpful?

Fits:YAMAHA TW225E 00- (Disc brake models) *Processing of switch hole is required|*It is necessary to change the throttle cable, clutch cable and brake hose., YAMAHA TW200E 00- (Disc brake models) *Processing of switch hole is required|*It is necessary to change the throttle cable, clutch cable and brake hose., YAMAHA TW200E -99 (Drum brake models) *Changing the throttle cable

To the arrangements for bar handling (part 3)

Excellent

May 28, 2020

Takamaru I bought it in December 2018 after referring to the imprint by Mr. S
My Separate handle is on the Top Bridge:It's set, but if it's this one, you can use it a little bit earlier via Handlebar Post I think I'll be able to go without replacing the Hose and Cables as they are just coming
If you have any difficulties with IMPACTHandlebar installation, this is the one to use
Takamaru Thank you for your support
Oh, I'll be careful about interfering with Tank