- I am glad to hear that the product was exactly as I had imagined.I think the 30mm Up has changed my driving posture somewhat.Since I have a large body, I thought it would look better if the handlebar ...Đọc thêm
- I bought it to lighten the burden on my arms and neck caused by leaning forward. The size is exactly as expected from a manufacturer. There is no tightness or looseness in the attachment part. Unfortu...Đọc thêm
- I also bought this one, which can move to the front or back, to give me more freedom to change the position.Đọc thêm
- PRO TAPER SE HON MINI The position was easy, but the bend of the wire/hose was too tight, and I didn't want to get into trouble with the wrecker later on during driving.Đọc thêm
- The products are accurate and nicely finished.Unfortunately, it is easy to scratch, so care should be taken during installation.Đọc thêm
- The handlebar is very low because I had to uncoil the seat on my D Tracker 125.You can find a lot of Clutch Wire on the web.Zita's product is a good product with no problem as long as you pay attentio...Đọc thêm
- I purchased it because of a problem of rising. The 30mm Bondor bar is used to take the clearance when processing reverse-wearing. As it goes up, you can just about avoid interference in each part. To ...Đọc thêm
- I bought more of the same Parts this timePreviously on 3Quantity:Set, in this case Quantity:It was an additional purchase of 1 SetParts were the wrong color..Both Standard bar (22.2mm) Height for:30mm...Đọc thêm
- I raised it by 30mmI put a high seat in KLX125 and installed it at the same time It takes a lot of courage to raise it, so please be sure to examine it carefully before installing itThe quality is abs...Đọc thêm
- REBEL (Manufactured by 1996) Mounting on.When the handlebar was cut to full, my arms stretched out, so I attached them and pulled Handlebar further..You can go without changing Cable classes.It's ...Đọc thêm
- I did not expect much on 30 mm Handlebar high up, but both Sitting and Standing made Position easier.Đọc thêm
- Just a little ride at NORMAL's Handlebar position - If I commute I am durable, but when I reach a long distance I feel tired from the arm to the waist, but it got much easier by raising the 20 mm ...Đọc thêm
- I'm on the XR 250 but, as I am tall, because I can not reach Handlebar unless I bend equivalent knees with Standing.StandingPosition has improved and it got easier to ride. Cospa is not bad either...Đọc thêm
- It is not a purchase from this shopping, but it was attached to the KLX 250.Even if you know the dimensions of the Handlebar that you plan to purchase while considering Handlebar replacement, I think ...Đọc thêm
- Normal handle up itemsIt is better to do it firmly with Screw lock of moderate strengthIt is best if you set the tap once on the body side if possibleĐọc thêm
- A Handle is changed, when a High throttle is introduced, Wire length remains for a while and the end Throttle of has become somewhat heavy.
making high the part in which the > Wire remained, and a H...Đọc thêm
CỬA HÀNG LỚN NHẤT
TẠI NHẬT BẢN
COUPON ĐẶC BIỆT,
GIẢM GIÁ, KHUYẾN MÃI
DỊCH VỤ GIAO HÀNG
NHANH, MIỄN PHÍ