- Purchased a used TT250R RAID carburetor because it was not working properly.It is lightly pimped out in Kit condition.As per the Instruction Manual, the Duct (Pig nose) of the Air Cleaner Box should b...Đọc thêm
- I installed it on my KDX220sr. Because it is an old car in 1996, the intake manifold was hardened very much and the inner diameter is narrow, so I shaved it off with Cutter Knife or Leutor. So I order...Đọc thêm
- There are already other imprints, but the installation is Large strange. Because I asked the shop, I diverted the intake manifold of HONDA MXRacer and the Lead Valve of NSR. I'm satisfied with the per...Đọc thêm
- I looked it up on the Net beforehand, but it's a strange installation Large.It seems to be cheaper to install if you use Honda's MXRacer intake manifold or Lead Valve.(That will cost more.)The Jet tha...Đọc thêm
- I asked the Shop for a very large oddity in the installation.If you look at the net, you can see some cases where Honda's MXRacer intake manifold and Lead Valve are being used.I referred to that as we...Đọc thêm
- I switched to this Big carburetor because my normal cab was not working well.You can find it on the net, but it seems to be installed in Large.There is a way to use Honda's MXRacer intake manifold and...Đọc thêm
- Normal cab is not doing well, so I changed it boldly.Looking at the Net, I asked the Shop to install it because it looks pretty Large strange.I use a CR125 intake manifold and an NSR250 Lead Valve.It ...Đọc thêm
- It is for TS200R, but I put it on TS125R.But I asked the Shop to install it because it seems to be super difficult to install.At an additional cost, though.It seems to be easier to install if you use ...Đọc thêm
- Firstly, when I installed it with a brand-new product, I overflowed, but when I inquired about how to deal with it, the correspondence of Wait Big was satisfactory as soon as possible.I would like to ...Đọc thêm
- I used it for RMX 250 SResponse - Power - Fuel consumptionThere is no weakness in all, I am satisfied with sufficient performanceI thought I could supply Oil only by replacing Hose, Nipple diameter wa...Đọc thêm
- RMX250S (~ 95) It is attached to. Previous carburetor (TM30SS) The difference is that the startability is totally different thing! Even the engine is hard to engage RMX. It improved dramatically. It t...Đọc thêm
- It is a commodity matching carburetor Body for TT 250 R, but it was used for XT 250 X.Originally Y30P (There are many diversion information) Although I was thinking about it, the design as a carbureto...Đọc thêm
- It equipped.
Although it is the Mikuni and exchange from TMX38 ... It is satisfaction remarkable at whose width of a Setting is wider than and the Mikuni which and the carburetor Set whose change ...Đọc thêm - Webike Monitor Since pure TK began to have done mischief, it exchanged.
MJ of 128 and 125 and SJ of 38 and 35 are contained in the Kit, and it can tune finely.
Are 120 neighborhoods and SJ also a p...Đọc thêm - Since the Main nozzle and Needle of the pure carburetor were worn out, it purchased by calling it one Throttle influence and the abbreviation half the price of FCR.
> attachment is easy.
Anyone is p...Đọc thêm - NSR80 was equipped.
I felt that it might be easy to issue a Setting as unexpected.
A Torque increases throughout and it is easy to ride.
-- although it is natural and is exchange of a Lead valve...Đọc thêm
CỬA HÀNG LỚN NHẤT
TẠI NHẬT BẢN
COUPON ĐẶC BIỆT,
GIẢM GIÁ, KHUYẾN MÃI
DỊCH VỤ GIAO HÀNG
NHANH, MIỄN PHÍ