- 2003 (PC37 first semester) Installed on a reimported car.The OEM is Semi-radial, so you can't just pimp it out.When the Handlebar is cut to Left, the Body hits the Meter, and so on.Adjust the angle of...Đọc thêm
- Tank Bracket is a GALE SPEED It was a Type-3Tank Bracket/TYPE-3 Up Handle/BrakePart #:29000024A correction to my earlier commentĐọc thêm
- Used 17.5 to MT-07 as OEMHoseThe result is awesome, it only works if you pull it offI've replaced many things in the past, including my car, but I've noticed a significant difference with the radial m...Đọc thêm
- The ○ I was using rado master diameter 19-18, but it was a bit stiff if Caliper piston diameter 32 × 4.Gale's Ф 17. I tried using 5-16 ~ 18VRCSeries.The feeling that Front sinks as much as you gra...Đọc thêm
- Brembo caliper GP 4 to S1000RR brembo 5. I used 5 Full floating, brembo Racing radial MASTER φ 19 - 18, but because there is not much change with the combination of OEM's Brembo caliper and Nisshi...Đọc thêm
- To improve the performance of Brake, it is very effective to exchange Master cylinder to RadialPump and it is essential in myself Items. Brake is required not only for its performance but also for con...Đọc thêm
- 【What made you decide the purchase?】Fall in high SIDE at Circuit. At that time, OEM's Brake master that I used badly broke Large.Purchasing than buying OEM's Nisshin radial master, I wanted to...Đọc thêm
- I am using it for 690 DUKE.Installation is compatible with two types of Hose diameters, and there are not problems as Switch and Tank options are abundant. Instead, I do not see an external option lik...Đọc thêm
- There have been considerable expiration points in the past few months, so I bought a Radial brake master I wanted for a long time.Horizontal Type5 / It was an exchange from 8 so I thought it was φ19 -...Đọc thêm
- It installed in SR 400.Clutch is a Wire expression, but I chose GALE SPEED because I wanted to match color with Brand.Building is good for flowing and movement is also Smooth.Although the vehicle is d...Đọc thêm
- MT-09 attached to ABS (ProductNoVRC17-17BG). The Power lever that comes with the Standard is bending too tight, it hits the Throttle holder when it grips deeply, and replaced with Lever of the optiona...Đọc thêm
- I exchanged the MASTER side for exchanging Clutch side with Gail's Clutch holder. It is installed at the same time as SEA BASSOEMbrembo, but the feeling of Brake increased several steps compared t...Đọc thêm
- Reason for selection Recent SS is Caliper pistonSize is Small In 19 Pi, Touch is Paspadzuku and it may be soft at 16. 5 Pie selected Gail in Lineup. Although it is also company B, Lever ratio is 18-20...Đọc thêm
- I was using Nisshin radial, but Touch is hard and I do not like it so I changed it to 19-17 and it got my favorite Touch.The point to worry is that the positional relationship between Body and Tank is...Đọc thêm
- NORMAL's BrakeTouch was also good, but I also wanted to enjoy even better quality control performance.Racing parts so there is no choice, but if it is Street youth there is also a slightly straigh...Đọc thêm
- I used OEMCaliper with VRC φ 17, but when I changed Caliper to Brembo Casting 4 Pot, I felt that feeling of pulling Lever became very Sponge - so I purchased a new VRC φ 19.Lever ratio is currently se...Đọc thêm
CỬA HÀNG LỚN NHẤT
TẠI NHẬT BẢN
COUPON ĐẶC BIỆT,
GIẢM GIÁ, KHUYẾN MÃI
DỊCH VỤ GIAO HÀNG
NHANH, MIỄN PHÍ