245,092 VND
(1,495 JPY)
4 (1 Đánh giá )
rating breakdown
5 Sao |
|
0 |
4 Sao |
|
1 |
3 Sao |
|
0 |
2 Sao |
|
0 |
1 Sao |
|
0 |
Very Good
Dimmer adjustment is troublesome ? ? ?After replacing the LED Blinker, I tried installing it because I wanted to leave Position function.
Because Body is Small Type for Car, it is appreciated to install in Motorcycle.
It is a little troublesome to set the setting which is just unique to the operation for dimming adjustment. It was convenient if you had an adjustment Dial and so on ? ? ?.
Most Viewed Reviews Of AMC Other Indicator Options / Repair Parts
Very Good
Installed on a Z400 without blinker position.[How is it used?
Installed on a 2022 Kawasaki Z400 without blinker position function.
In addition, the BlinkerLED and hazard lamp functions were added to Z400 at the same time as this product.
Blinker position and Hazard were added as necessary to improve visibility from the car.
Was the one you received as per Image?
As per Image.
Since we knew that Waterproof performance could not be expected, there was no particular Shock.
Was the installation difficult?
Since this product is a FOR VEHICLE product, waterproof performance is not expected at all.
Therefore, it is necessary to put away the Body in a place where it will not get wet as much as possible.
In Z400, I decided to put it under the MainSeat where there is enough space and wiring is still easy to do.
Since wiring the wires coming out of this product to the Front Blinker is quite time-consuming, we recommend that you allow plenty of time for this work.
The instruction manual is quite detailed, so if you read it carefully and take on the task, you should be able to install it without problems.
How was your experience with it?
The blinker position was lit well because I was able to wiring exactly.
Note that this product could be used with a home-made Hazard circuit using a rectifier diode without any problem.
In that case, this product is downstream from the Hazard interrupt circuit. (The line really in front of the Front Blinker) Interruptions to the
[Included Parts:were they on?
In Hemp palm pack
Electro Tap (Wiring Interrupt Connector)
[Was there anything that disappointed you?
None
Point and hang of installation
If you have a soldering iron and a wire stripper, it is better not to use the Electro Tap to prevent a trouble such as not energizing.View Detail
Very Good
European styleThe front blinker can be positioned to give a European style look, and there is an OnOff switch so you can always go back to normal.View Detail
Very Good
Inexpensive and easy But it is what it isI bought it from another site
A friendly Instruction Manual is included for installation, which is sufficient to help you get the job done
The Electro Tap is also included in the kit, so if you buy it, you will have no installation problems
If you store the Body under the Seat, you don't have to worry about the rain It was not
The difficulty is probably inherent to the vehicle body, but you can't just misinterpret a signal in Noise and suddenly Position sometimes disappears Then it comes back in about a second, so there is no problem with the function
However, if you are concerned about it, you may find that it disappears even though you have not entered a directional instruction, so if you are concerned about it, you may want to contact us after installation I think it's best to monitor your progress
As an addendum, you are instructed to cut the Blinker line, but if it's a Motorcycle, you can use the Since it doesn't take much time and effort, I thought it would be good to make a branching Harness by yourself with Connector I thinkView Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
CỬA HÀNG LỚN NHẤT
TẠI NHẬT BẢN
COUPON ĐẶC BIỆT,
GIẢM GIÁ, KHUYẾN MÃI
DỊCH VỤ GIAO HÀNG
NHANH, MIỄN PHÍ