448,707 VND
(2,737 JPY)
4 (1 Đánh giá )
rating breakdown
5 Sao |
|
0 |
4 Sao |
|
1 |
3 Sao |
|
0 |
2 Sao |
|
0 |
1 Sao |
|
0 |
Very Good
ConvenientThe four corners of the phone are fixed so that they do not interfere with the Connector on the top and bottom Both Sides surfaces There is no
So it can be secured even if you have a cord attached
As for the fixation method, tighten the middle part of the double lock part of the reverse side first, and then tighten the outer part Just tighten it up It did not come loose in the driving test
There is also a USBConnector on the reverse side for charging! So it was useful in many ways
Most Viewed Reviews Of MADMAX Smart Phone Holder / Mount
Excellent
GoodI used it to install a Smartphone on my Scooter, and it holds it well.
The four corners are securely fastened so there is no risk of falling.
It is also conveniently adjustable to any 360-degree angle.View Detail
Excellent
It's solidEasily installed on the air-conditioner's air vent louver.
The Smartphone Holder can hold a Smartphone securely.
It is a simple shape, so you will never get tired of it.View Detail
Very Good
Hold tight.This Smartphone Holder can be easily attached to the Louver of the air conditioner vent and holds your Smartphone securely and safely.View Detail
Very Good
reasonable in priceIt is very easy to install.
I do have some concerns about the strength of the Arm that holds the phone in place.
The goodness of the division that the Strap which assumes the case of the fall which is always attached to the mid-sized product is not attached is a good impression.
Durability is quite uneasy against the wind pressure of high-speed running with Large type NAKED etc.
Resistance to rain and UV rays will be verified in the future.View Detail
Very Good
Easy to install.It can be used for both road motorcycle and scooter and holds the smartphone firmly. The four corners are fixed firmly so that it is stable and can be adjusted to any angle 360 degrees.View Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
CỬA HÀNG LỚN NHẤT
TẠI NHẬT BẢN
COUPON ĐẶC BIỆT,
GIẢM GIÁ, KHUYẾN MÃI
DỊCH VỤ GIAO HÀNG
NHANH, MIỄN PHÍ