* Cửa hàng TỐT NHẤT và DUY NHẤT để có thể tìm kiếm hàng chính hãng Nhật Bản. * Đăng ký ngay bây giờ để nhận ưu đãi bất ngờ và những quà tặng đặc biệt khác! *Hơn 800,000 sản phẩm. KHÔNG khó để tìm kiếm phụ tùng mà bạn muốn.
ĐĂNG NHẬP VÀO WEBIKE NHẬT BẢN
Vui lòng nhập email với ít nhất 6 ký tự.
Vui lòng nhập email hợp lệ.
Email này đang được sử dụng.
Tài khoản của bạn đã bị khóa.
Email và/hoặc mật khẩu thì không đúng.
Việc xác thực bằng facebook không hợp lệ. Vui lòng thử lại.
Email thì cần thiết, vui lòng chia sẻ email của bạn.
Vui lòng chọn "Bằng cách nào bạn biết đến Webike Nhật Bản"?
HOẶC
TÀI KHOẢN CỦA BẠN ĐÃ ĐƯỢC TẠO!
Chúc mừng bạn! Tài khoản mới của bạn đã được tạo!
Bây giờ với những đặc quyền của thành viên, bạn có thể tích lũy được thêm nhiều kinh nghiệm mua sắm trực tuyến với chúng tôi.
Nếu bạn có BẤT KỲ câu hỏi về hoạt động của cửa hàng trực tuyến này, vui lòng gửi mail đến Webike thông qua phần Liên hệ với chúng tôi.
Một email xác nhận sẽ được gửi đến địa chỉ email mà bạn đã cung cấp. Trong vòng 1 tiếng đồng hồ, nếu bạn vẫn chưa nhận được email thì vui lòng liên hệ với chúng tôi.
We use cookies to provide and improve our services. By using our site, you consent to our Privacy Policy including cookie. Learn more
I bought the same part number that was on OutletSale I can't write Impression because that one was removed and I can't write Impression, so I'll write it here
This is for the Kawasaki Z, but I bought it to use on other models I checked the operation, but the Horn switch is not working I took it apart and tried to analyze Wiring, but I still think that Wiring's solder position is It seemed wrong
The solder was heaped up on the side where it was supposed to be installed as well, so it seemed to be a human error It is In my case, it was originally intended to be a diversion, so it was good to rewrite the Wiring diagram anyway I'm sure those planning to put it on will be in trouble
The defective solder of Passing switch is written in Impression of the other person, and and I think PMC should get their quality control and manufacturing process review right It is
The Horn switch and Passing switch, which are my defective parts, are on the same board I guess the process there is bad It's certainly not a structure you see very often, so I wonder if the Chinese workers are confused LOL!
At any rate, in my case, I was able to use it by reapplying the solder I don't think this is the reason for Outlet, but I'm OK with it because I got it cheap If you are about to buy one, we recommend that you do a thorough operation check before using it
The product is good clean and read to use BUT BE VERY CAREFUL BOTH LEFT AND RIGHT APPEAR ON PHOTO BUT YOU ARE ONLY BUYING EITHER LEFT OR RIGHT SIDE CONTROLS.. I GOT CAUGHT AND HAD RE ORDER OTHER SIDE AND EXTRA POSTAGE!!!!View Detail
Very nice remake, pretty much identical to the OEM Kawasaki H2 switch, both inside and outside. There are some small differences and the quality is a little bit poorer than the OEM, but it's great value for the money and a sweet looking switch. I fitted it to my 12v Dax, and the wiring was easy to adapt to my harness. I also painted the "dots" black because I think that looks better. View Detail
Fits: KAWASAKI ZEPHYR1100 02-06 A7-A10 always-on model, choke lever not available, KAWASAKI ZEPHYR750 01-03 C7-C9 Always-on Model Not compatible with choke lever
Installed on my Australian model Zephyr 1100. The plastic connectors were the same, however I had to change the position of the wires in the block. Well made quality switchView Detail
The product is good clean and read to use BUT BE VERY CAREFUL BOTH LEFT AND RIGHT APPEAR ON PHOTO BUT YOU ARE ONLY BUYING EITHER LEFT OR RIGHT SIDE CONTROLS.. I GOT CAUGHT AND HAD RE ORDER OTHER SIDE AND EXTRA POSTAGE!!!!View Detail
?attachment The CBR650R is mounted at the same position angle as the NORMAL. However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away. I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose. ・NORMAL (Reserve integrated horizontal master) Impressions of No complaints on public roads. Familiar feel and very easy to handle. However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful. Radipon (Reserve separate body portrait master) Impressions of It was totally different from what I expected, my expectation was that it would feel like a Rear brake… It is really a mild and easy-to-handle radipon. On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN? But I felt the radipon effect from Breaking a little stronger, and It can be hung up to a hard brake without effort. I felt trust that this could stop.View Detail
I purchased this for use with multiple Helmets. 。 Mount included with the BOLD. Microphone and speaker are not included and must be purchased separately.View Detail
CỬA HÀNG LỚN NHẤT
TẠI NHẬT BẢN
COUPON ĐẶC BIỆT,
GIẢM GIÁ, KHUYẾN MÃI
DỊCH VỤ GIAO HÀNG
NHANH, MIỄN PHÍ