2,449,606 VND
(14,942 JPY)
1,968,276 VND
(12,006 JPY)
(20 OFF%)
4 (2 Đánh giá )
rating breakdown
5 Sao |
|
0 |
4 Sao |
|
2 |
3 Sao |
|
0 |
2 Sao |
|
0 |
1 Sao |
|
0 |
Very Good
Personally, I'd like to see a little more SmallPurchased for the XR250
The Tanax Moto fizz ShellSeatBackSS I've been using has a height of 17 As high as 3mm, it's quite conscious when straddling a motorcycle
The legs that used to be able to lift in town riding get tired from driving in the woods, etc., and the SeatBack You will get stuck (Maybe it's due to the high Seat high and my age.)
The burden of taking off the SeatBack and carrying the luggage for it is Large
It's just easier to fix tools and other heavy and bulky items to the Motorcycle Nice Large sized piece of equipment
Decided on the product
It was only available in Inch display, but the capacity is about 3.2 liters, and it's a large size with a reasonable height and width
I thought it would be ideal if it were a little shorter in length so it could be installed horizontally
As the product name says, it is for a rear fender, but it comes with a Bolt, a Washer and a stopper Fix it to the fender with the Nut (4 places in a box)
It's easy to drill a hole in any place you want and fix it in place, but the product and Drilling a hole in the Motorcycle's Fender took the plunge (give up)
Well, there's a ring at the four corners that I don't know what it is, so maybe that will hold it in place..
I installed it on top of the Mojabi Side Back myself, but it's a little bit of weight in front of me I drilled a hole in the position and made a Rubber collar to reduce the gap between the Fender and
I fixed it so that there is no wobble in the Back and Bolt
There was still plenty of room in the KTC's Tool bag for air gauge, gloves, etc
Anti-theft locks can also be installed
Thanks to this tool bag, the Side Back has a raincoat, Tire wrench and Can hold Puncture Repair Kit, foot-operated Cylinders, etc So should you be able to handle Trouble on the go?
Large size of the Tool bag is 27.94cmX15.24cmX7.62cm
Toolbox, Mounting Bolt Set and Instruction Manual (Achara) With (word)
The inside is a stylish orange color
Reviews For NELSON RIGG PACK REAR FENDER TOOLBAG [3510-0089] From Other Webike User
Very Good
After looking for a tail bag, I chose this one.Used in KLX250.
I had been using a Laphro tail bag for about 8 years, but it was falling apart, so I looked for a new tail bag and chose this one. I couldn't find Laphro in the market anymore.
The Size was indeed wide from the review of my predecessor, so I tried to put it on vertically too.
However, since the shape of the fender is not flat, it doesn't fit in the vertical direction. As a result of this, I decided to use the Fender board (1.5mm thick aluminum plate) I made a "Fender&rarr" from the bottom and fixed it sideways with Fender→Guidebook→Bag. Because there is a guide plate, I could somehow fit in sideways. sometimes (Lol)
I think it has enough capacity for a toolbox.
What I'm interested in is the waterproof nature of this product. I don't know what is written in the instruction manual. (Lol)
View Detail
Most Viewed Reviews Of NELSON RIGG Toolbag
Very Good
After looking for a tail bag, I chose this one.Used in KLX250.
I had been using a Laphro tail bag for about 8 years, but it was falling apart, so I looked for a new tail bag and chose this one. I couldn't find Laphro in the market anymore.
The Size was indeed wide from the review of my predecessor, so I tried to put it on vertically too.
However, since the shape of the fender is not flat, it doesn't fit in the vertical direction. As a result of this, I decided to use the Fender board (1.5mm thick aluminum plate) I made a "Fender&rarr" from the bottom and fixed it sideways with Fender→Guidebook→Bag. Because there is a guide plate, I could somehow fit in sideways. sometimes (Lol)
I think it has enough capacity for a toolbox.
What I'm interested in is the waterproof nature of this product. I don't know what is written in the instruction manual. (Lol)
View Detail
Other Reviews From Japanese Webike user
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
CỬA HÀNG LỚN NHẤT
TẠI NHẬT BẢN
COUPON ĐẶC BIỆT,
GIẢM GIÁ, KHUYẾN MÃI
DỊCH VỤ GIAO HÀNG
NHANH, MIỄN PHÍ