* Cửa hàng TỐT NHẤT và DUY NHẤT để có thể tìm kiếm hàng chính hãng Nhật Bản. * Đăng ký ngay bây giờ để nhận ưu đãi bất ngờ và những quà tặng đặc biệt khác! *Hơn 800,000 sản phẩm. KHÔNG khó để tìm kiếm phụ tùng mà bạn muốn.
ĐĂNG NHẬP VÀO WEBIKE NHẬT BẢN
Vui lòng nhập email với ít nhất 6 ký tự.
Vui lòng nhập email hợp lệ.
Email này đang được sử dụng.
Tài khoản của bạn đã bị khóa.
Email và/hoặc mật khẩu thì không đúng.
Việc xác thực bằng facebook không hợp lệ. Vui lòng thử lại.
Email thì cần thiết, vui lòng chia sẻ email của bạn.
Vui lòng chọn "Bằng cách nào bạn biết đến Webike Nhật Bản"?
HOẶC
TÀI KHOẢN CỦA BẠN ĐÃ ĐƯỢC TẠO!
Chúc mừng bạn! Tài khoản mới của bạn đã được tạo!
Bây giờ với những đặc quyền của thành viên, bạn có thể tích lũy được thêm nhiều kinh nghiệm mua sắm trực tuyến với chúng tôi.
Nếu bạn có BẤT KỲ câu hỏi về hoạt động của cửa hàng trực tuyến này, vui lòng gửi mail đến Webike thông qua phần Liên hệ với chúng tôi.
Một email xác nhận sẽ được gửi đến địa chỉ email mà bạn đã cung cấp. Trong vòng 1 tiếng đồng hồ, nếu bạn vẫn chưa nhận được email thì vui lòng liên hệ với chúng tôi.
We use cookies to provide and improve our services. By using our site, you consent to our Privacy Policy including cookie. Learn more
I installed it on the VINO125 made by YAMAHA in Taiwan.
In fact, I was thinking of buying a Bar End because I had an end OpeningGrip on it, but I didn't know what to do. If you think about buying Bar End, isn't it cheaper to buy End CloseGrip? So I chose this one.
Quantity:Pair (for Left and Right) It is not seen because it is closed, and it is not bothered even if it grips it that much though the remainder part comes out.
When you install the Grip, you don't need the Grip bond, which is an adhesive. If you install it after spraying with Parts cleaner, it will go in completely while it is wet, and if it dries, the rubber will melt a little and stick firmly. Moreover, when removing it, it is enough because it is easy to take off if it does it with Parts cleaner.
If you want to use it stylishly, I think this Grip is fine.
I've been riding a motorcycle for a month now. The other day, I experienced Battery rise for the first time. I got worried that the Cell was broken and kept turning it, but it didn't take. I gave up on it and called the motorcycle shop, but it seemed to be caused by the Grip heater that was attached to the bike when I bought it. I took this opportunity to change the Grip with my first Custom included.
V-TWIN MAGNA fits as described in the official website (1Inch size).
I have no idea what the key process is … sorry, I hired a motorcycle shop to do it for me, so I have no idea!
The Grip heater that originally came with KIJIMA's "GH08 Push Switch 。 The Diamond Grip is about 2.3cm longer in length than this one.
Also, the motorcycle shop said that the glue on the Throttle side didn't work properly and wrapped the tape around it. (Can't see it from the outside, probably inside.) Maybe Inner Throttle is not an OEM? I'm not sure, but it was finally put on perfectly.
It doesn't feel slippery in the grip because the Diamond part is a rubber!
The Grip is also silver to match the silver of the car body. It's 1 inch thick. Fat. Fat! And the length! (More than OEMLever) The truth is that the Brand's "Rail Grip (1 inch), but Webike didn't have it in stock...
Also, when I received the Grip and opened the seal, there was some oil on it. Is that what you would do if you bought a new Grip? It wasn't as much as I would have liked, but just in case you were wondering, I'm here to report!
Just changing the Grip is a great way to change your impression of a motorcycle! It's inexpensive, but it's a solid build and brand, so you can rest assured that it's a good cosmetic product, so I'd recommend it for your first custom!
I was thinking of changing the Handlebar when I got a little more comfortable with it!View Detail
You can make it stylish with the Diamond cut shape! The uneven areas are comfortable to grip and even less slippery! The ability to change the look and feel of the product depending on the color is also very attractiveView Detail
?attachment The CBR650R is mounted at the same position angle as the NORMAL. However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away. I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose. ・NORMAL (Reserve integrated horizontal master) Impressions of No complaints on public roads. Familiar feel and very easy to handle. However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful. Radipon (Reserve separate body portrait master) Impressions of It was totally different from what I expected, my expectation was that it would feel like a Rear brake… It is really a mild and easy-to-handle radipon. On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN? But I felt the radipon effect from Breaking a little stronger, and It can be hung up to a hard brake without effort. I felt trust that this could stop.View Detail
I purchased this for use with multiple Helmets. 。 Mount included with the BOLD. Microphone and speaker are not included and must be purchased separately.View Detail
CỬA HÀNG LỚN NHẤT
TẠI NHẬT BẢN
COUPON ĐẶC BIỆT,
GIẢM GIÁ, KHUYẾN MÃI
DỊCH VỤ GIAO HÀNG
NHANH, MIỄN PHÍ