490,112 VND
(2,990 JPY)
447,493 VND
(2,730 JPY)
(9 OFF%)
2 (5 Đánh giá )
Excellent
It's cheap, but the shape and performance are both perfect.It's cheap, but the shape is cool and can be installed on any motorcycle as long as you have an adapter.
The quality of the detail is there, but... It's cheap. "If anything, I'm lucky to get it at this price. I think it's just about the right amount to give up.
It is recommended for those who want to introduce the Bar end mirror easily.
The mounting area of the Mirror is about 30φ.
Reviews For Rin Parts Thanh gương hình bầu dục From Other Webike User
Average
Good rear visibility.The NSR50's mirror was tightened together with the thin Cowl Bracket, so it was shaking due to vibration and rear visibility was poor.
If you put it on the Separate handle, I think you will have different taste in looks, but I like the Bar end mirror better.
It is easy to be damaged by standing and falling, but it is inexpensive and easy to buy, so it is not a problem.View Detail
Terrible
cheap (cheap)I guess some things need some work to be installed.
I managed to install the Nut and RubberWasher that came with the RC250 by engaging the Nut and RubberWasher.
It's very poor visibility due to the small size and distorted mirror surface.View Detail
Poor
can not seeIs it too hard to install on Separate handle?
Even if it says Single, in a voluntary SRX Tank, fixing Mirror in a position that is easy to see is a Tank and you have to set it in a difficult position to see.
I can not recommend it for Motorcycle of Separate handle because it is hard to see.
I think that it is no problem if it is a MOTARD system with a high handlebar position.View Detail
Terrible
Rin Parts Rin Parts Oval Bar End MirrorSt FireSpec. I was ha ha ha ha ha! If I saw a box I could not open the box with a bad feeling to write for ZOOMER where there was no explanation anywhere, cute little Small Mirror entered.
I tried to temporarily fix it to the curved Renthal's TaperUp Handle, but there was no indication for the convenience of the hole.
I bought it as a cinnamon in the hand, but only the arm.
I think that it will be quickly replaced by a nice Combination Nifrek if even Mirror is taken off.View Detail
Most Viewed Reviews Of Rin Parts Bar-End Mirror
Very Good
Good budget mirrors with a better viewing angleAbout quality and texture, I can confirm that the quality is good and that the material used is aluminum alloy that has been machined to shape. About the feeling of use, These mirrors are less instrusive then the original mirrors and when fitted to the bike also offer a better viewing angle from their convex designed mirror. Products to buy together, While working on the handle bars it would be advantages to also add a set of more comfortable grips to your cart. Difficulty of installation, I can say the fitment of the bar end mirrors for my installation was very easy due to the simplistic design of how the mirrors secure to the inside of the handle bar pipe.Cost performance and comparison with other products, The pricing of the product is great. You receive a set of bar end mirrors that are of good quality and a great look. The pricing of the majority of the other bar end mirrors available are much higher for similar product.About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View Detail
Excellent
Bar End Mirrors from Rin Parts* About quality and texture, Durable black painted finish over the aluminium housing and mounting brackets.* About the feeling of use, Extremely happy with the low profile look of the front area and I can now see clearly what is behind me.* Products to buy together, To tidy up the front area further a nice set of machined aluminium brake and clutch levers.* Difficulty of installation, The installation with aftermarket handle bars is just insert into the end of the bar and tighten down the allen key bolt, then remove the Honda OEM ones and plug the mounting holes. The process was completed in 30 minutes with no difficultly.* Cost performance and comparison with other products, No cheaper bar end mirrors of this style and great quality for the price. Webike do offer much fancier designs and machined aluminium finishes if your budget allows.* About shipping and packaging, I am happy to wait 8 weeks on average for my parts to arrive in Sydney Australia via Webike's sea freight which comes with tracking and insurance so I know I'm covered in case something was to go wrong but with there outstanding bubble wrapping and boxing there have been no problems.* Any concerns, cautions, or advice when purchasing, If you still have the Honda OEM handle bars installed then you will not be able to just insert into the end of the bar and tighten down the allen key bolt, modification of the setup will be required. Use the product reviews to assist in making a decision on your purchase.View Detail
Excellent
RIN PARTS Bar End MirrorAbout quality and texture - Top quality. Cast aluminium body with a nice chrome finish to match the old school style motorcycles.About the feeling of use - These are much better looking style wise then the OEM Honda lollipop mirrors and I now have more visability behind me due to the wider mounting position of the mirrors.Products to buy together - After removing the OEM mirrors you will be left with exposed bolt holes in those mounting points, so you will be wanting so blanks to cover these up. Webike offer plastic ones at a low cost which blend in well or cnc machined ones if you need to add some bling.Difficulty of installation - Once you remove the OEM bar ends on the Monkey their will be inserts let in the handle bars which you can use to mount up these bar end mirrors once you discard the spreader rings. Easy install that will take 30 minutes to complete.Cost performance and comparison with other products - These bar end mirrors are on the cheap end of the pricing scale but I find the quality tops for the money. If you want the best bar end mirrors out there then you'll want some CNC machined ones at a much higher cost. Webike have a great range to choose from.About shipping and packaging - Sea freight is my preferred shipping option and usually arrives in Australia in 6 to 8 weeks from dispatch. Always well packaged to ensure parts arrive safety and are ready for use.Any concerns, cautions, or advice when purchasing - Take into consideration the diameter of your handle bars when looking for bar end mirrors as these will not fit fat bars due to the larger internal diameter.View Detail
Excellent
RIN PARTS Bar End MirrorAbout quality and texture - Top quality. The surface finish from the CNC machining is so much better then the plastic OEM mirrors.About the feeling of use - They mount firmly to the handlebars with zero vibration even when idling the bigger 1200cc V-twin.Products to buy together - Some short CNC brake and clutch levers go together nicely with these mirrors.Difficulty of installation - Installation process is easy and can be accomplished with just an allen key but I did find that I needed to add a spacer on the throttle side to stop the mirror binding up on the throttle tube. Cost performance and comparison with other products - $32 AUD for a set of anodised CNC machined mirrors Just as good as the expensive ones and I'm not a fan of spending big dollars on mirrors as they are something I damage quite easily.About shipping and packaging - Sea freight is my preferred shipping option and usually arrives in Australia in 6 to 8 weeks from dispatch. Always well packaged to ensure parts arrive safety and are ready for use.Any concerns, cautions, or advice when purchasing - These mirrors have a convex lens which can be strange to use initially but once you get use to them I find them much better then a standard flat mirror.View Detail
Excellent
I love them, because not just a mirror, they fuctioning as the bar end stabilizer too, reduce the vibration on my handlebar. The mirror is looks very nice, reasonable prize but good build quality. It's fit the low handlebar on my bike, and make the cockpitI love them, because not just a mirror, they fuctioning as the bar end stabilizer too, reduce the vibration on my handlebar. The mirror is looks very nice, reasonable prize but good build quality. It's fit the low handlebar on my bike, and make the cockpit looks simple without ordinary mirror. View Detail
Other Reviews From Japanese Webike user
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
CỬA HÀNG LỚN NHẤT
TẠI NHẬT BẢN
COUPON ĐẶC BIỆT,
GIẢM GIÁ, KHUYẾN MÃI
DỊCH VỤ GIAO HÀNG
NHANH, MIỄN PHÍ