* Cửa hàng TỐT NHẤT và DUY NHẤT để có thể tìm kiếm hàng chính hãng Nhật Bản. * Đăng ký ngay bây giờ để nhận ưu đãi bất ngờ và những quà tặng đặc biệt khác! *Hơn 800,000 sản phẩm. KHÔNG khó để tìm kiếm phụ tùng mà bạn muốn.
ĐĂNG NHẬP VÀO WEBIKE NHẬT BẢN
Vui lòng nhập email với ít nhất 6 ký tự.
Vui lòng nhập email hợp lệ.
Email này đang được sử dụng.
Tài khoản của bạn đã bị khóa.
Email và/hoặc mật khẩu thì không đúng.
Việc xác thực bằng facebook không hợp lệ. Vui lòng thử lại.
Email thì cần thiết, vui lòng chia sẻ email của bạn.
Vui lòng chọn "Bằng cách nào bạn biết đến Webike Nhật Bản"?
HOẶC
TÀI KHOẢN CỦA BẠN ĐÃ ĐƯỢC TẠO!
Chúc mừng bạn! Tài khoản mới của bạn đã được tạo!
Bây giờ với những đặc quyền của thành viên, bạn có thể tích lũy được thêm nhiều kinh nghiệm mua sắm trực tuyến với chúng tôi.
Nếu bạn có BẤT KỲ câu hỏi về hoạt động của cửa hàng trực tuyến này, vui lòng gửi mail đến Webike thông qua phần Liên hệ với chúng tôi.
Một email xác nhận sẽ được gửi đến địa chỉ email mà bạn đã cung cấp. Trong vòng 1 tiếng đồng hồ, nếu bạn vẫn chưa nhận được email thì vui lòng liên hệ với chúng tôi.
We use cookies to provide and improve our services. By using our site, you consent to our Privacy Policy including cookie. Learn more
When I tried to remove the grip from the throttle pipe of my Katana, I found the ribs on both ends of the pipe and wondered if I should cut them off. I thought I could install it because it was not suitable for KATANA, but it was suitable for GSX-S1000. It can be installed without any modification.
It makes install Kijima grip heater easier, i can install throttle grip without addhesive.I used Kijima GH10 before, it was good, but little bit play on the throttle due to the optional gear parts, but now with this tube there is no throttle play.I used several Kijima products until now, they supply aftermarket parts with the great quality and decent price. I think they are smart, do hard work and one of the best motorcycle aftermarket product company.View Detail
I purchased this product to install KIJIMA's Grip heater on my DL1000 V-STROM250. Because it is the same Manufacturer for SUZUKI as Grip heater, it is possible to install in Motorcycle and install Grip heater. Even an amateur could work on it with no problem. I'm not sure if I would buy a product at this price or spend the time and effort to cut down on the OEM. It's up to you.View Detail
It makes install Kijima grip heater easier, i can install throttle grip without addhesive.I used Kijima GH10 before, it was good, but little bit play on the throttle due to the optional gear parts, but now with this tube there is no throttle play.I used several Kijima products until now, they supply aftermarket parts with the great quality and decent price. I think they are smart, do hard work and one of the best motorcycle aftermarket product company.View Detail
I bought Kijima throttle tube to replace the old on my Honda VFR800 VTEC 2003. I use the stock grip on Kijima throttle tube, is very strong, work very light and smooth throttle.View Detail
It was purchased for use on the XSR900, but was not used in the end, and the STD Mounted Product Grip was taken and used. Reasons for not using it include
Length is 5mm shorter than OEM Product There is a non-slip rib that OEMs don't have.
Certainly, even if it is 5mm shorter, it would be possible to use it if the inner diameter and Wire fixing part are the same Size. Also, Grip will probably go in even if there is some Rib to prevent slipping. The Instruction Manual also lists the XSR900 as a compatible model, but it clearly states that some models require modifications, etc. The Manufacturer is not at fault, as even the actual photo is posted and shows the length and rib properly.
It is easy to assume that they are exactly the same shape as compliant products.
I replace the grip of XG250 TRICKER every 20,000km, because it is troublesome to take out the adhesive of Throttle pipe, and I think that SlotPipe is consumable goods as well as Tire and Brake Pads, and I replace it at the same time as Grip. When I use the hand guard, it needs to be processed, so I chose the Other Brand Product which can be used without processing. I bought KIJIMA's product this time, but I am not particular about it.View Detail
?attachment The CBR650R is mounted at the same position angle as the NORMAL. However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away. I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose. ・NORMAL (Reserve integrated horizontal master) Impressions of No complaints on public roads. Familiar feel and very easy to handle. However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful. Radipon (Reserve separate body portrait master) Impressions of It was totally different from what I expected, my expectation was that it would feel like a Rear brake… It is really a mild and easy-to-handle radipon. On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN? But I felt the radipon effect from Breaking a little stronger, and It can be hung up to a hard brake without effort. I felt trust that this could stop.View Detail
I purchased this for use with multiple Helmets. 。 Mount included with the BOLD. Microphone and speaker are not included and must be purchased separately.View Detail
CỬA HÀNG LỚN NHẤT
TẠI NHẬT BẢN
COUPON ĐẶC BIỆT,
GIẢM GIÁ, KHUYẾN MÃI
DỊCH VỤ GIAO HÀNG
NHANH, MIỄN PHÍ