452,411 VND
(2,760 JPY)
432,741 VND
(2,640 JPY)
(4 OFF%)
5 (9 Đánh giá )
Excellent
Purchase with Drain boltI bought this because I wanted to take the temperature from the Drain bolt.
It's functioning properly!
Reviews For SP TAKEGAWA Dây cảm biển đồng hồ nhớt SP Takegawa: SP Takegawa From Other Webike User
Excellent
Good item for monkey 125It's a really good product. Both the finish and the design are excellent. Thank you for your prompt delivery. I recommend this product to others, too.View Detail
Excellent
온도 센서 추가 구입했음. 정비사가 센서 분리를 서투르게 해서 손상을 입었다. 재사용은 가능하지만 혹시 몰라서 여분의 센서를 구입했다. 센서만 따로 팔아서 매우 좋다. 교체는 누구나 할 수 있는 수준으로 문제가 없다. 앞으로 엔진오잏 교체시 내가 직접 분리하거 정지소에 가는 것이 좋겠다고 생각한다. View Detail
Very Good
Sensor probe Bought a complete set temperature meter previously but after sometime the sensor probe went faulty. Perhaps I over tighten it but anyway, it's working fine now. I bought 2 pcs due to the expensive shipping fees. View Detail
Excellent
Replacement Temperature Sensor for the SP Takegawa Compact LCD ThermometerAbout quality and texture: I am happy with the quality of the temperature sensor stick from SP Takegawa. Made using a short electrical wire attached to the temperature bulb and using a small electrical connector that allows easy positioning when routing the wire.About the feeling of use: The temperature sensor 3mm diameter bulb fits perfectly into the SP Takegawa oil drain bolt and passes the signal for display on the compact LCD therometer but care must be taken during install so to not crush the bulb and during removal so to not pull the wire from the bulb.Products to buy together: A SP Takegawa oil drain bolt with the mounting hole for the temperature sensor stick would also be desirable to purchase along side the temperature sensor stick for a secure mounting.Difficulty of installation: The process to install takes about 5 minutes, use the included allen key from the oil drain bolt purchase to back off the grub and position the bulb into the bolt then lightly tighten the grub screw to avoid crushing the bulb. Connect the electrical plug and zip tie the wire in a suitable position to avoid being damage if just left hanging from the bottom of the engine. Not difficult to do.Cost performance and comparison with other products: Good costing as you are getting a accurate reading temperature sensor made from quality parts that is plug and play with the SP Takegawa compact LCD thermometer. There are cheaper sensors available from Koso but am unsure if they would work with the SP Takegawa compact LCD thermometer.About shipping and packaging: Sea frieght was my perferred method of shipping due to the lower cost but currently unavailable due to Japan Post. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged.Any concerns, cautions, or advice when purchasing: Keep in mind these compact LCD thermometers are only designed to read between 0 to 120 degress celsius so will not be suitable for all locations around the engine.View Detail
Excellent
SP TAKEGAWA Stick Temperature SensorAbout quality and texture - Top quality. Perfectly manufactured sensor assembly with heat shrink at the temperature bulb end and electrical connector end to minimise temperature errors due to water ingestion.About the feeling of use - The reading from the temperature sensor to the display is flawless. On inital engine start up the display reads ambient temperature delivered from the sensor and as the motorcycle is riden the temperature display adjusts from the sensor reading at the oil drain bolt.Products to buy together - You will be needing at least a product to display the temperature reading the sensor will read and Takegawa have a few different options available here on Webike depending on your budget. Then if you would like the temperture reading at the oil sump, Takegawa offer an oil drain bolt to retain the sensor securely.Difficulty of installation - The sensor is very easy to install. A simple electical connection and then secure the sensor where you would like it to read the temperature.Cost performance and comparison with other products - I find the pricing good for such a handly product that makes my riding experience more enjoyable. I did not compare other brands temperature sensors as I required the one with the correct electrical connection for my Takegawa meter.About shipping and packaging - Sea freight is my preferred shipping option and usually arrives in Australia in 6 to 8 weeks from dispatch. Always well packaged to ensure parts arrive safety and are ready for use.Any concerns, cautions, or advice when purchasing - Takegawa offer their temperature sensors in 3 styles, stick, M5 and B1. So select what best suits your setup.View Detail
Most Viewed Reviews Of SP TAKEGAWA Oil / Water Temperature Sensor
Excellent
Good item for monkey 125It's a really good product. Both the finish and the design are excellent. Thank you for your prompt delivery. I recommend this product to others, too.View Detail
Excellent
온도 센서 추가 구입했음. 정비사가 센서 분리를 서투르게 해서 손상을 입었다. 재사용은 가능하지만 혹시 몰라서 여분의 센서를 구입했다. 센서만 따로 팔아서 매우 좋다. 교체는 누구나 할 수 있는 수준으로 문제가 없다. 앞으로 엔진오잏 교체시 내가 직접 분리하거 정지소에 가는 것이 좋겠다고 생각한다. View Detail
Very Good
Sensor probe Bought a complete set temperature meter previously but after sometime the sensor probe went faulty. Perhaps I over tighten it but anyway, it's working fine now. I bought 2 pcs due to the expensive shipping fees. View Detail
Excellent
Replacement Temperature Sensor for the SP Takegawa Compact LCD ThermometerAbout quality and texture: I am happy with the quality of the temperature sensor stick from SP Takegawa. Made using a short electrical wire attached to the temperature bulb and using a small electrical connector that allows easy positioning when routing the wire.About the feeling of use: The temperature sensor 3mm diameter bulb fits perfectly into the SP Takegawa oil drain bolt and passes the signal for display on the compact LCD therometer but care must be taken during install so to not crush the bulb and during removal so to not pull the wire from the bulb.Products to buy together: A SP Takegawa oil drain bolt with the mounting hole for the temperature sensor stick would also be desirable to purchase along side the temperature sensor stick for a secure mounting.Difficulty of installation: The process to install takes about 5 minutes, use the included allen key from the oil drain bolt purchase to back off the grub and position the bulb into the bolt then lightly tighten the grub screw to avoid crushing the bulb. Connect the electrical plug and zip tie the wire in a suitable position to avoid being damage if just left hanging from the bottom of the engine. Not difficult to do.Cost performance and comparison with other products: Good costing as you are getting a accurate reading temperature sensor made from quality parts that is plug and play with the SP Takegawa compact LCD thermometer. There are cheaper sensors available from Koso but am unsure if they would work with the SP Takegawa compact LCD thermometer.About shipping and packaging: Sea frieght was my perferred method of shipping due to the lower cost but currently unavailable due to Japan Post. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged.Any concerns, cautions, or advice when purchasing: Keep in mind these compact LCD thermometers are only designed to read between 0 to 120 degress celsius so will not be suitable for all locations around the engine.View Detail
Excellent
SP TAKEGAWA Stick Temperature SensorAbout quality and texture - Top quality. Perfectly manufactured sensor assembly with heat shrink at the temperature bulb end and electrical connector end to minimise temperature errors due to water ingestion.About the feeling of use - The reading from the temperature sensor to the display is flawless. On inital engine start up the display reads ambient temperature delivered from the sensor and as the motorcycle is riden the temperature display adjusts from the sensor reading at the oil drain bolt.Products to buy together - You will be needing at least a product to display the temperature reading the sensor will read and Takegawa have a few different options available here on Webike depending on your budget. Then if you would like the temperture reading at the oil sump, Takegawa offer an oil drain bolt to retain the sensor securely.Difficulty of installation - The sensor is very easy to install. A simple electical connection and then secure the sensor where you would like it to read the temperature.Cost performance and comparison with other products - I find the pricing good for such a handly product that makes my riding experience more enjoyable. I did not compare other brands temperature sensors as I required the one with the correct electrical connection for my Takegawa meter.About shipping and packaging - Sea freight is my preferred shipping option and usually arrives in Australia in 6 to 8 weeks from dispatch. Always well packaged to ensure parts arrive safety and are ready for use.Any concerns, cautions, or advice when purchasing - Takegawa offer their temperature sensors in 3 styles, stick, M5 and B1. So select what best suits your setup.View Detail
Other Reviews From Japanese Webike user
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
CỬA HÀNG LỚN NHẤT
TẠI NHẬT BẢN
COUPON ĐẶC BIỆT,
GIẢM GIÁ, KHUYẾN MÃI
DỊCH VỤ GIAO HÀNG
NHANH, MIỄN PHÍ