* Cửa hàng TỐT NHẤT và DUY NHẤT để có thể tìm kiếm hàng chính hãng Nhật Bản. * Đăng ký ngay bây giờ để nhận ưu đãi bất ngờ và những quà tặng đặc biệt khác! *Hơn 800,000 sản phẩm. KHÔNG khó để tìm kiếm phụ tùng mà bạn muốn.
ĐĂNG NHẬP VÀO WEBIKE NHẬT BẢN
Vui lòng nhập email với ít nhất 6 ký tự.
Vui lòng nhập email hợp lệ.
Email này đang được sử dụng.
Tài khoản của bạn đã bị khóa.
Email và/hoặc mật khẩu thì không đúng.
Việc xác thực bằng facebook không hợp lệ. Vui lòng thử lại.
Email thì cần thiết, vui lòng chia sẻ email của bạn.
Vui lòng chọn "Bằng cách nào bạn biết đến Webike Nhật Bản"?
HOẶC
TÀI KHOẢN CỦA BẠN ĐÃ ĐƯỢC TẠO!
Chúc mừng bạn! Tài khoản mới của bạn đã được tạo!
Bây giờ với những đặc quyền của thành viên, bạn có thể tích lũy được thêm nhiều kinh nghiệm mua sắm trực tuyến với chúng tôi.
Nếu bạn có BẤT KỲ câu hỏi về hoạt động của cửa hàng trực tuyến này, vui lòng gửi mail đến Webike thông qua phần Liên hệ với chúng tôi.
Một email xác nhận sẽ được gửi đến địa chỉ email mà bạn đã cung cấp. Trong vòng 1 tiếng đồng hồ, nếu bạn vẫn chưa nhận được email thì vui lòng liên hệ với chúng tôi.
We use cookies to provide and improve our services. By using our site, you consent to our Privacy Policy including cookie. Learn more
If you look at AMAZON or Preview, you'll see that mine stopped moving the needle about 3 months after installation! And that's within about 300k miles! I wouldn't recommend it!
This product from Special Parts Takegawa would have to be my favorite item I have added to my Honda Monkey 125cc. The installation does take some time to complete if you want to run the wires neatly but it is not a difficult install to do. Once installed I was not completely happy with the look so ended up adding some black tape around the housing to match the OEM cluster which turned out better then I expected. All the features Special Parts Takegawa have added to this tachometer are a must for a motorcycle these days. The clock is used on a daily basis and the temperature reading to monitor my 143cc N-20 BBK.View Detail
I bought this because I wanted an Analog Tachometer and I like the look and the clock.:Set, and I am trying to measure the outside temperature. Installation was easy and even I, a beginner, was able to install it easily.View Detail
This product from Special Parts Takegawa would have to be my favorite item I have added to my Honda Monkey 125cc. The installation does take some time to complete if you want to run the wires neatly but it is not a difficult install to do. Once installed I was not completely happy with the look so ended up adding some black tape around the housing to match the OEM cluster which turned out better then I expected. All the features Special Parts Takegawa have added to this tachometer are a must for a motorcycle these days. The clock is used on a daily basis and the temperature reading to monitor my 143cc N-20 BBK.View Detail
Bike is a USA z125m (Monkey) built August 2018. In the picture you can see the supplied harness installed exactly where the harness should be, according to the instructions included with the Tachometer. The limited depth of the headlight bucket makes this the only feasible position for the connector. As you can see, one of the three wires in the supplied harness is too short. It is pulled very tight, and pulls the original connector out of place. The wire is too tight to be acceptable, and the LED headlight no longer fits because it rests on the original connector on the right which has been pulled forward by the taut wire.Another mistake in the Takegawa harness is the gauge of wire for the ground is too small. The USA version of the Monkey does not use LED turn signals, it uses incandescent turn signals which require more current than LED. In the picture you can see the heavier gauge turn signal ground wire on the Honda turn signal harness (on the right) and the very light gauge supplied jumper wire that is to be inserted into the circuit. It likely will work, but it is definitely under sized for the USA application.I had high expectations for this product because of the expensive price and the good reputation of Takegawa, I am disappointed that I cannot use this product on my Honda Monkey 125.View Detail
I bought this because I wanted an Analog Tachometer and I like the look and the clock.:Set, and I am trying to measure the outside temperature. Installation was easy and even I, a beginner, was able to install it easily.View Detail
You can set a lower rpm for break-in (Yellow color lights up at -500 rpm from the set rpm, and Red lights up at the set rpm). It's supposed to have a rev limiter on it so it shouldn't overrev, but I'll miss the Tachometer! (LOL) Installation is a breeze, just put the included harness between them!View Detail
?attachment The CBR650R is mounted at the same position angle as the NORMAL. However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away. I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose. ・NORMAL (Reserve integrated horizontal master) Impressions of No complaints on public roads. Familiar feel and very easy to handle. However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful. Radipon (Reserve separate body portrait master) Impressions of It was totally different from what I expected, my expectation was that it would feel like a Rear brake… It is really a mild and easy-to-handle radipon. On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN? But I felt the radipon effect from Breaking a little stronger, and It can be hung up to a hard brake without effort. I felt trust that this could stop.View Detail
I purchased this for use with multiple Helmets. 。 Mount included with the BOLD. Microphone and speaker are not included and must be purchased separately.View Detail
CỬA HÀNG LỚN NHẤT
TẠI NHẬT BẢN
COUPON ĐẶC BIỆT,
GIẢM GIÁ, KHUYẾN MÃI
DỊCH VỤ GIAO HÀNG
NHANH, MIỄN PHÍ