1,413,991 VND
(8,625 JPY)
3 (3 Đánh giá )
Terrible
It's not durable.I used to ride Motorcycle about once a week and the Hinge cracked after about a year.
Because the Converter itself is thicker, the gap between the Shield and Helmet has widened and wind entrainment has increased.
Material:I did not feel Merit compared to Aluminum's Converter.
Reviews For BUCO Chuyển đổi khiên From Other Webike User
Very Good
It has a good quality and luxurious feelWe have previously seen BUCO's "Bolt-On Bubble Shield WITH Converter I used to use the
https://www.webike.net/sd/20356277/
One cold winter morning, after years of use, I raised the Shield and the Arm part broke off. I did. I've used it enough to give up with age, so I don't think this is a particular problem for me.
There is not so much damage to the Shield, so this time "Shield Converter purchased
I've always been concerned about the wind rolling in a bit from the top of the Arm, but at street speed, not so much. If you don't care about it and have a high speed range of use, you can use the sturdy transparent Vinyl Tape to cure it. will be gone.
It's much easier to use than that, and it's much easier to shieldUP at a signal.
The product arrived and was replaced as soon as possible.
Shield off... This is where I realized Hata.
"Shield Converter is Snap Button Type.
"Bolt-On Bubble Shield WITH Converter is Bolt On style.
Hmmm, can't we divert the Bolt... Snap button...
So, I snapped the Bubble shield of Snap button as soon as possible! . And while we're at it, we had a change of scenery in stock. [Color] I made it to Smoke.
As for the installation, the Shield and Converter buttons are very stiff, so you can't install them. I feel like I'm doing my best. I think it's probably for wind resistance, so that's the only thing I have to work on. The rest is perfectly fine.
These are the Impressions, but it's important to note that the part that stops the Shield is "Bolt On style. When "Snap Button Type. There are a number of things to keep in mind if you're buying.View Detail
Very Good
The construction is quintessentialI bought it for my Jet helmet
At first, the installation of the Snap button was hard, and I thought it was a defective product, but once it enters, it is normal afterwards It stays
It's good quality and you don't have to worry about it breaking or going up under wind pressure
It's well made for a high price
color is [Color] The only thing I can do is Clear, and I don't use it too often because it doesn't look good on the Black JetView Detail
Most Viewed Reviews Of BUCO Other Helmet Options / Repair Parts
Very Good
It has a good quality and luxurious feelWe have previously seen BUCO's "Bolt-On Bubble Shield WITH Converter I used to use the
https://www.webike.net/sd/20356277/
One cold winter morning, after years of use, I raised the Shield and the Arm part broke off. I did. I've used it enough to give up with age, so I don't think this is a particular problem for me.
There is not so much damage to the Shield, so this time "Shield Converter purchased
I've always been concerned about the wind rolling in a bit from the top of the Arm, but at street speed, not so much. If you don't care about it and have a high speed range of use, you can use the sturdy transparent Vinyl Tape to cure it. will be gone.
It's much easier to use than that, and it's much easier to shieldUP at a signal.
The product arrived and was replaced as soon as possible.
Shield off... This is where I realized Hata.
"Shield Converter is Snap Button Type.
"Bolt-On Bubble Shield WITH Converter is Bolt On style.
Hmmm, can't we divert the Bolt... Snap button...
So, I snapped the Bubble shield of Snap button as soon as possible! . And while we're at it, we had a change of scenery in stock. [Color] I made it to Smoke.
As for the installation, the Shield and Converter buttons are very stiff, so you can't install them. I feel like I'm doing my best. I think it's probably for wind resistance, so that's the only thing I have to work on. The rest is perfectly fine.
These are the Impressions, but it's important to note that the part that stops the Shield is "Bolt On style. When "Snap Button Type. There are a number of things to keep in mind if you're buying.View Detail
Very Good
The construction is quintessentialI bought it for my Jet helmet
At first, the installation of the Snap button was hard, and I thought it was a defective product, but once it enters, it is normal afterwards It stays
It's good quality and you don't have to worry about it breaking or going up under wind pressure
It's well made for a high price
color is [Color] The only thing I can do is Clear, and I don't use it too often because it doesn't look good on the Black JetView Detail
Other Reviews From Japanese Webike user
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
CỬA HÀNG LỚN NHẤT
TẠI NHẬT BẢN
COUPON ĐẶC BIỆT,
GIẢM GIÁ, KHUYẾN MÃI
DỊCH VỤ GIAO HÀNG
NHANH, MIỄN PHÍ