* Cửa hàng TỐT NHẤT và DUY NHẤT để có thể tìm kiếm hàng chính hãng Nhật Bản. * Đăng ký ngay bây giờ để nhận ưu đãi bất ngờ và những quà tặng đặc biệt khác! *Hơn 800,000 sản phẩm. KHÔNG khó để tìm kiếm phụ tùng mà bạn muốn.
ĐĂNG NHẬP VÀO WEBIKE NHẬT BẢN
Vui lòng nhập email với ít nhất 6 ký tự.
Vui lòng nhập email hợp lệ.
Email này đang được sử dụng.
Tài khoản của bạn đã bị khóa.
Email và/hoặc mật khẩu thì không đúng.
Việc xác thực bằng facebook không hợp lệ. Vui lòng thử lại.
Email thì cần thiết, vui lòng chia sẻ email của bạn.
Vui lòng chọn "Bằng cách nào bạn biết đến Webike Nhật Bản"?
HOẶC
TÀI KHOẢN CỦA BẠN ĐÃ ĐƯỢC TẠO!
Chúc mừng bạn! Tài khoản mới của bạn đã được tạo!
Bây giờ với những đặc quyền của thành viên, bạn có thể tích lũy được thêm nhiều kinh nghiệm mua sắm trực tuyến với chúng tôi.
Nếu bạn có BẤT KỲ câu hỏi về hoạt động của cửa hàng trực tuyến này, vui lòng gửi mail đến Webike thông qua phần Liên hệ với chúng tôi.
Một email xác nhận sẽ được gửi đến địa chỉ email mà bạn đã cung cấp. Trong vòng 1 tiếng đồng hồ, nếu bạn vẫn chưa nhận được email thì vui lòng liên hệ với chúng tôi.
We use cookies to provide and improve our services. By using our site, you consent to our Privacy Policy including cookie. Learn more
As soon as the rear sprocket arrives, it will be replaced at the motorcycle shop, so I can't write any impressions of the bike yet, but part of the proceeds will be donated to Gold.
This is my 2nd set of order from Webike in 1 month. From packaging to delivery of the item is 2nd to none. The item itself is 5 star rating. Good job webike! Keep up the good work in emptying my pocket (hehehe). Till my next order. View Detail
[How is it used? YZF-R1 (2CR) I decided to change to Other Brand Product along with Rear Sprocket because the OEMSprocket of Since the rear sprocket is SUNSTAR, the front side is also SUNSTAR.
Was the one you received as per Image? Unlike the OEM, there is no rubber or plastic guide. This is the type without guide. As expected, the weight difference between the OEM and the front sprocket is not that much, and the OEM is light enough. I chose the same 525 Size 16T as the OEM.
[Was it difficult to install? YZF-R1 (2CR) can be replaced as soon as the Nut claw is raised. However, Nut is quite torquey, so you need to turn it with all your might while stepping on the rear brake. The accuracy of the installation on the shaft was perfect. There is no rattle at all. I also replaced the Nut with a new one. (Part number:90179-22018×1pc.) The price was 572 as of February 2022.
How was your experience with it? I drove around town after the replacement, but I couldn't really tell much. I also cleaned the chain after replacing the Sprocket, so it runs very smooth, but I don't know if it's because of this product. LOL!
【Review】 I don't know if it's because of this product or not, but it runs very smooth! I do have some concerns about durability, but I'm hopeful!View Detail
Sprocket is a PinDrill, especially the Driven Sprocket, which is made of steel, so it's hard to see the performance difference and you tend to choose the cheapest one.
However, the Chinese Sprocket I bought for that kind of use is the worst, and although it's certainly installable and usable, the teeth are badly shaped and the Chain doesn't bite in and separate.
I didn't particularly care for the ride, but it wasn't good enough for me to notice, so I got tired of it and replaced it with the expensive but reliable SUNSTAR.
The difference is obvious. Since it is such a part, you can't experience any weight gain at all, but you can understand the good and bad of the shape in one shot.
Don't buy the cheap stuff, either, folks. If you don't have a proper, reliable, top-notch brand, you'll hurt your chain. Not a good fee ring running without going that far! Cheap stuff sucks, especially when it's close to an empty run!
You can use any manufacturer if you are a top-tier manufacturer, but I think the domestic Sunstar is the best in terms of quality.View Detail
I got tired of the fact that the roundness of the Sprocket, which I didn't understand the nameless brand I had been using, was bad (the axis didn't come to the Center) and the chain sticking changed according to the place.
You can't be stingy with these things, but only if you use the right Manufacturer's stuff. Of course, MADE IN SUNSTAR is perfect. The roundness of the chain sticking is the same no matter where it is measured, and most importantly, the vibration when driving is gone. Above all, the vibration is gone when running.
Speaking of the obvious, I'm talking about Atarimae, but it reaffirmed to me that there are some things that are not good in the world.
Also, SUNSTAR has good teeth. The shape is neat and standardized, and Chain's bite and separation is very Smooth. This is the part where even a small difference can give you a tricky feel, so the Hayash domestic products are great.
All Manufactures are made of steel and have no special shape, so people tend to think that the cheaper the better, but that's not true. There is a decent difference. I don't want a Sprocket that doesn't roll smoothly, even if it's half the price.View Detail
About quality and textureExcellent productAbout the feeling of usesmooth running.quality is good.About shipping and packaginggood packaging and fast shippingView Detail
About quality and textureGood Product. light weight.About the feeling of usegood for the smooth run.About shipping and packagingFast Shipping. package is well no way to damageView Detail
I ordered a 520 conversion kit for my Hayabusa 1300R which include Sunstar front sprochet 17 teeth same stock size (stoch with 530 size). The Sunstar front sprocket has super ligh weight, full kit include DID 520 ZVM-X chain 116 link , front sprocket 17 teeth and rear sprocket 43 teeth weight only about 2.5kg, I think I've lost 50 percent of the weight. View Detail
?attachment The CBR650R is mounted at the same position angle as the NORMAL. However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away. I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose. ・NORMAL (Reserve integrated horizontal master) Impressions of No complaints on public roads. Familiar feel and very easy to handle. However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful. Radipon (Reserve separate body portrait master) Impressions of It was totally different from what I expected, my expectation was that it would feel like a Rear brake… It is really a mild and easy-to-handle radipon. On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN? But I felt the radipon effect from Breaking a little stronger, and It can be hung up to a hard brake without effort. I felt trust that this could stop.View Detail
I purchased this for use with multiple Helmets. 。 Mount included with the BOLD. Microphone and speaker are not included and must be purchased separately.View Detail
CỬA HÀNG LỚN NHẤT
TẠI NHẬT BẢN
COUPON ĐẶC BIỆT,
GIẢM GIÁ, KHUYẾN MÃI
DỊCH VỤ GIAO HÀNG
NHANH, MIỄN PHÍ