Simple in it's design which offers performance gains in a compact package while improving the overall appearance

About quality and texture, I can confirm that the quality is great and that the materials used are a aluminum tubing, reinforced silcone coupler, stainless steel hose clamps and a water proof air filter. About the feeling of use, The ram air intake kit is much more compact when compared to the original air filter setup and looks better suited to the Monkey 125 with an incredible intake sound that is generated from the little motor. Products to buy together, While looks and sound are improved over the original setup, the negitive aspect that this setup brings is a lean fuel condition due to the additional air. Selecting a fuel controller to correct this problem would be ideal to also add to your cart. Difficulty of installation, I can say the fitment of the ram air intake kit for my installation was of average difficultly due to the access required to remove the original air filter setup and also position and secure the silicone hose to the throttle body. Cost performance and comparison with other products, The pricing of this product is high but worth the extra cost if you take into account the water proof and cleanable air filter that will see you through many years of use. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

About quality and texture - Top quality. Very happy with the polished finish on the aluminium intake tube and the water proof ability of the Sprint Filter.About the feeling of use - This air intake kit looks a 1000 times better then the OEM Honda airbox and that was the main reason behind installing it on the Monkey. There maybe a slight performance increase on a stock 125cc engine but nothing to rave about.Products to buy together - I find when you remove the OEM Honda airbox for an after market intake it does leave a large gap on the left hand side below the fuel tank and I would recommend adding the horn relocation bracket from Kijima to fill that void.Difficulty of installation - Pretty straight forward install here and no special tools required. You should have the old airbox removed and new ram air intake installed in under an hour. The intake tube can be positioned in a few different angles depending the look you're after.Cost performance and comparison with other products - This kit is expensive compared to the one available from Kitaco but I find the parts in this kit to be of a better quality and the look of this kit was what I was after.About shipping and packaging - Sea freight is my preferred shipping option and usually arrives in Australia in 6 to 8 weeks from dispatch. Always well packaged to ensure parts arrive safety and are ready for use.Any concerns, cautions, or advice when purchasing - If you are looking for that slight performance increase from the air intake but do not want a loud intake like this one is, I would suggest purchasing the power air filter from Takegawa that fits into the OEM Honda air box.View Detail

The welds are messy, though they look nice at first glance.
The Blowby insert is thicker and much shorter than the picture, so it is difficult to plumb.
I think it's an effective Parts for about 3000-6000 revolutions.View Detail

About quality and texture - The size medium sticker from SP Takegawa is made using polyvinyl chloride sheet with a polypropylene film, the quality from the overall fit and finish is perfect.About the feeling of use - What to buy when you have everything SP Takegawa on your motorcyle and now need to display your passion, but I find the size of this sticker big with limited positions available on my minimotos.Products to buy together - If you are looking to add as much SP Takegawa detail as possible to your life then one key product to purchase to accomplish this would be a SP Takegawa 50th anniversary T-shirt.Difficulty of installation - The installation of the size medium sticker is an simple task that took 0.1 of an hour to complete. Common sense is all that is required to secure the sticker to an area of the appropriate size. Motorcycle swingarm, fork legs, car window, toolbox or beer fridge in the garage, the options are endless. Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for and the size medium sticker no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the size medium sticker, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The hose clamp from Kitaco is made from billet aluminum with detailed machining and a black anodized surface finish, the quality from the overall fit and finish is perfect.About the feeling of use - This hose clamp does an awesome job increasing the appeal on the Grom by allowing the removal of the original plastic zip tie like hose clamp used on the handlebars to secure the electrical harness. Products to buy together - A key product to purchase when looking to further increase the appeal on the Grom would be a billet aluminium starter motor cover to dress up the original cheap looking piece.Difficulty of installation - The installation of the hose clamp is a simple task that took 0.2 of an hour complete. Common sense is all that is required to secure the hose clamp around the electrical harness and onto the handlebars.Cost performance and comparison with other products - I find the cost of all the products Kitaco sell to great value when compared to what most other companies sell their products for and the hose clamp is no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the hose clamp, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View Detail

About quality and texture - The track racer seat from G-Craft is made using a fibreglass seat base, synthetic perforated tuck 'n roll material for the seat cover top and faux suede for the seat cover sides, the quality from the overall fit and finish is perfect.About the feeling of use - I was excited when I saw that G-Craft had released this flat shaped seat with it's track racer inspired look and had to have it. Suitably comfortable in regards to it's shape and foam used. Still not as comfortable as the original Honda seat, but the custom look the seat offers the Monkey 125 is awesome.Products to buy together - A key product to purchase for that unique custom build is the taillight kit from Hurricane that removes the entire rear fender. Another product that is tiny and further minimizes the Monkey 125.Difficulty of installation - The installation of the track racer seat is a simple task that took 0.5 of an hour to complete. Some slight mechanical aptitude and the use of basic hand tools is all that is required to secure thetrack racer seat to the frame rails.Cost performance and comparison with other products - I find the cost of all the products G-Craft sell to be on par when compared to what most other companies sell their products for and track racer seat is no different.About shipping and packaging - This was part of a big order and sea frieght was used to keep the costs down. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The P4 right brake caliper from Brembo is made from cast aluminium with a black anodized surface finish and includes brake pads, the quality from the overall fit and finish is perfect.About the feeling of use - The P4 right brake caliper is initially overwhelming to look at on the minimoto with it's massive physical appearance but soon becomes part of the Monkey 125 with it's black finish that matches the original styling, not to mention the improved feel and braking performance with it's larger diameter pistons and higher quality brake pads.Products to buy together - The Honda Monkey 125 is an inexpensive motorcycle with a lot of low quality parts from the factory, so the purchasing of other high quality parts like this P4 right brake caliper from Brembo would be perfect but the essential product to purchase to complete the installation is a front brake support bracket to allow for the meshing together of the Brembo brake caliper and the Honda lower fork leg.Difficulty of installation - The installation of the P4 right brake caliper is a intermediate task that took 0.7 of an hour to complete. Some mechanical aptitude and the use of basic hand tools is what is required to secure the P4 right brake caliper to the bracket and bleed the brake caliper.Cost performance and comparison with other products - I find the cost of all the products Brembo sell to be higher then what most other companies sell their products for and the P4 right brake caliper is no different, but this is due to the high quality materials used and the consistent high quality finish of their products.About shipping and packaging - With there being no significant cost difference between sea freight and EMS for the P4 right brake caliper, I chose EMS for an earlier arrival dates. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The P2 rear brake caliper from Brembo is made from cast aluminium with a black anodized surface finish and includes brake pads, the quality from the overall fit and finish is perfect.About the feeling of use - The P2 rear brake caliper offers a similar look to the factory brake caliper while improving braking performance with it's larger piston diameter and higher quality brake pads.Products to buy together - The Honda Monkey 125 is an inexpensive motorcycle with a lot of low quality parts from the factory, so the purchasing of other high quality parts like this P2 rear brake caliper from Brembo would be perfect but the essential product to purchase to complete the installation is a rear caliper support bracket.Difficulty of installation - The installation of the P2 rear brake caliper is a intermediate task that took 0.7 of an hour to complete. Some mechanical aptitude, knowledge on disassembling the Honda Monkey 125 and the use of basic hand tools is what is required to secure the P2 rear brake caliper to the bracket and bleed the brake caliper.Cost performance and comparison with other products - I find the cost of all the products Brembo sell to be higher then what most other companies sell their products for and the P2 rear brake caliper is no different, but this is due to the high quality materials used and the consistent high quality finish of their products.About shipping and packaging - With there being no significant cost difference between sea freight and EMS for the P2 rear brake caliper, I chose EMS for an earlier arrival dates. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail