* Cửa hàng TỐT NHẤT và DUY NHẤT để có thể tìm kiếm hàng chính hãng Nhật Bản. * Đăng ký ngay bây giờ để nhận ưu đãi bất ngờ và những quà tặng đặc biệt khác! *Hơn 800,000 sản phẩm. KHÔNG khó để tìm kiếm phụ tùng mà bạn muốn.
ĐĂNG NHẬP VÀO WEBIKE NHẬT BẢN
Vui lòng nhập email với ít nhất 6 ký tự.
Vui lòng nhập email hợp lệ.
Email này đang được sử dụng.
Tài khoản của bạn đã bị khóa.
Email và/hoặc mật khẩu thì không đúng.
Việc xác thực bằng facebook không hợp lệ. Vui lòng thử lại.
Email thì cần thiết, vui lòng chia sẻ email của bạn.
Vui lòng chọn "Bằng cách nào bạn biết đến Webike Nhật Bản"?
HOẶC
TÀI KHOẢN CỦA BẠN ĐÃ ĐƯỢC TẠO!
Chúc mừng bạn! Tài khoản mới của bạn đã được tạo!
Bây giờ với những đặc quyền của thành viên, bạn có thể tích lũy được thêm nhiều kinh nghiệm mua sắm trực tuyến với chúng tôi.
Nếu bạn có BẤT KỲ câu hỏi về hoạt động của cửa hàng trực tuyến này, vui lòng gửi mail đến Webike thông qua phần Liên hệ với chúng tôi.
Một email xác nhận sẽ được gửi đến địa chỉ email mà bạn đã cung cấp. Trong vòng 1 tiếng đồng hồ, nếu bạn vẫn chưa nhận được email thì vui lòng liên hệ với chúng tôi.
We use cookies to provide and improve our services. By using our site, you consent to our Privacy Policy including cookie. Learn more
Thank you. This is exactly what I expected.I have made a motorcycle over 2 years.Mostly I used parts from Honda NC750X, including kickstand,but it turns out normal kickstand is so long that can not hold motorcycle properly.luckily, I found out there is a short type kickstand for NC750X here, that's why I bought it.I'm so satisfied your products.Thanks a million.
단순히 전후 위치만 바뀌는 것이 아니라 조금 더 좌측으로 사이드 스탠드가 위치하면서 지지력이 매우 강해진다. 다만 단점이라면 순정 사이드 스탠드로는 지지가 불안하다 순정을 더 짧게 가공하던가 본인처럼 조정식 사이드 스탠드를 장착하여 짧게 조정하여야 한다. 잘만 조정하면 좌우로 기울어진 도로 어디에서든 안정적으로 주차가 가능하다. 사실상 별 5개를 줘도 충분하지만 순정 스탠드와의 조합이 만족스럽지 않기에 4점을 준다.View Detail
이 제품 제가 사용 하고 있는데 너무 좋습니다..!! 스위시125 타시는 분에게는 필수 구매 !! 이거 없이 사용하다 보면 사이드 스탠드가 점점 기울어 지는데 이 제품 쓰면 어느 정도 높이가 나와서 좋습니다----------------------------------------------I'm using this product and I love it..!! A must-have purchase for those who ride the Swiss 125!! If you use it without it, the side stand gradually tilts.Powered by Google TranslatorView Detail
It increases stability to the point where OEMs are frustrated as to why they could not do this. The balance of the OEM is such that the front of the Carrier floats when you press down on it with your hand, even when unloaded, and it changes to a sense of stability that does not waver when you put a little weight on it. Installation is simple and straightforward, but a Torque wrench is required. In particular, the bolt near the under bracket needs to be tightened behind the crankcase, so if the screw hole is broken by Overtorque, the entire crankcase will have to be replaced. If you are not confident about this, bring the bolt in or ask someone who is familiar with it to do it for you. Side stands sensors can also be used without modification if the wiring is changed. All Bolts are specified with a specific Torque, so be sure to observe the Torque. This is also stated in the assembly manual. One regret I have is that the Center Stand interferes with the BackOffset if a Side StandAdapteretc. is installed to increase the installation surface. This must be addressed with the use of the anti-embedding Platec. Nevertheless, the product is relatively easy to install and highly effective.View Detail
The finish of the bracket and STAND is perfect, and the STANDBOLT nut and springs are Honda OEM parts. The rearward offset makes it difficult to fall over even when the rear box is fully loaded with luggage. I use it with reinforced STANDBracket and it is very useful!View Detail
On a slope such as a forest road "I'll stop. or as an auxiliary STAND on soft surfaces.
Was the one you received as per Image?
Image is correct. The strength is enough.
Was the installation difficult?
If you follow the manual, you will not fail. The tightening torque is also listed and easy to understand.
How was your experience with it?
It extends from a little behind the footpeg and has high stability on hard ground such as Asphalt. If you try to STAND while seated, you'll almost step on the Kick pedal.
[Included Parts:were they on?
All the necessary bolts are included, GCraft's Right Side Stand was released earlier but it did not include STANDArm. This product is all-in-one and easy to understand. Don't forget to use the grease on the pipod.
[Was there anything that disappointed you?
The ”foot” of the STAND is the same as the NC750 series, and the area is small, and it is a little uneasy on the soft road surface. The stand plate (extended plate) for NC750 can be installed to increase the area of the foot, but the extended plate interferes with the center stand because the clearance between the center stand and the plate is tight.
Other items that would be helpful Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
It's also the fact that it was on a CT110. "I wonder what it's like. I was curious about this, but I was very satisfied with the practicality.
It is regrettable that the area of ”foot”of STAND is too small. I think that many people who want to attach the Right Side Stand like this product to the rider's use scene are those who drive on the dirt with full of camping gear and stop on the soft ground for camping. It would have been better if the area of the ”foot”was larger and less likely to sink on soft surfaces.View Detail
CỬA HÀNG LỚN NHẤT
TẠI NHẬT BẢN
COUPON ĐẶC BIỆT,
GIẢM GIÁ, KHUYẾN MÃI
DỊCH VỤ GIAO HÀNG
NHANH, MIỄN PHÍ