Vị trí lắp đặt két làm mát dầu : Chỉ đạo gốc
Ổ cắm dầu : Die Cast Cover
Thông số kỹ thuật áp dụng : Xe được trang bị bộ phuộc trước thẳng đứng SP Mukawa Φ27/Φ30
Vòi dầu : Vòi mỏng
Số công đoạn làm mát dầu và đường dầu : 4 Fin 5 Oil Line
*Chỉ dành cho xe đạp được trang bị phuộc trước thẳng đứng SP Takegawa.
* Không thể cài đặt sản phẩm này trên Bộ ly hợp đặc biệt (Vỏ ly hợp đúc) / ly hợp khô.
* Bộ làm mát dầu cho nắp ly hợp đúc đi kèm với nút bịt lỗ dầu. Khi lắp bộ làm mát dầu, nhớ lắp nút lỗ dầu hoặc lắp bộ điều nhiệt. Nếu không lắp gì, dầu sẽ không lưu thông.
* Tùy theo lô có thể giao sản phẩm với giá cũ và tem nhãn với mã JAN cũ trước khi giá thay đổi.
* Có thể thay đổi thông số kỹ thuật của sản phẩm do nguyên nhân của nhà sản xuất.
Oil cooler installation location:Steering Stem
Oil outlet: Die Cast Clutch Cover
Applicable Specifications: bikes equipped with SP Takegawa Φ27 upright / Φ30 upright front fork kit
Oil hose:Slim Line Hose
Oil cooler stages and oil lines:4 fin 5 oil line
*Only for bikes equipped with SP Takegawa upright front forks.
*This product cannot be installed on Special Clutch (Cast Clutch Cover) / Dry Clutch.
*The oil cooler kit for die-cast clutch cover comes with an oil hole plug. When installing the oil cooler, be sure to install the oil hole plug or install the thermostat unit.If nothing is installed, the oil will not circulate.
*Depending on the lot, the product may be delivered with the old price and label with the old JAN code before the price change.
*There may be changes in product specifications due to the manufacturer's reasons.