・60Φ
· Đèn LED trắng
・ 220km / h
Dành riêng cho xe ắc quy 12V
AnalogODOMeter
・ AnalogTRIPMeter
Thời gian lắp đặt dự kiến: 0,5h
* Cần có đồng hồ đo chống rung để lắp đặt.
* Đồng hồ tốc độ là một mô hình tiêu chuẩn trong nước. "60km / h = 1.400rpm" Xe công tơ cơ chính hãng tiêu chuẩn (Xe sử dụng cáp đồng hồ) Vì vậy, về cơ bản bạn có thể sử dụng nó. Nó không thể được sử dụng cho xe ô tô nước ngoài với các tiêu chuẩn mét khác nhau hoặc một số xe ô tô cũ.
* Chỉ dành cho xe chạy pin 12V. Xe không dùng pin, xe 6V ắc quy (Bao gồm các mô hình được chuyển đổi sang thiết bị điện 12 V) Không hoạt động đúng.
* Nó không hoàn toàn không thấm nước. Bề mặt kính có thể bị đục do chênh lệch nhiệt độ và độ ẩm bên trong và bên ngoài đồng hồ.
* Các chỉ số khác nhau có thể trở nên không sử dụng được bằng cách tháo đồng hồ chính hãng. Vui lòng chuẩn bị riêng nếu cần thiết.
* Cáp mét là một vật phẩm tiêu hao. Nếu ống bên ngoài bị nứt hoặc hư hỏng, độ ẩm, dầu, bụi, vv. có thể vào bên trong đồng hồ và gây ra sự cố. Khi thay thế đồng hồ cơ, hãy nhớ kiểm tra cáp đồng thời và thay thế bằng đồng hồ mới nếu cần thiết.
* Đồng hồ tốc độ và đồng hồ đo tốc độ ở trạng thái phát sáng do sự khác biệt về cấu trúc bên trong và màu quay số. (Đặc biệt là vào ban đêm) Sự khác biệt sẽ xuất hiện. Xin lưu ý.
* Hệ thống dây điện của dây nịt cần được sửa đổi theo xe. Vui lòng chuẩn bị các thiết bị đầu cuối đạn vv. riêng biệt.
* Thông số kỹ thuật sản phẩm có thể thay đổi do lý do nhà sản xuất. Xin lưu ý.
・60Φ
・White LED lighting
・220km/h
・For 12V battery vehicles only
・Analog ODO Meter
・Analog TRIP Meter
・Approximate installation time: 0.5h
*An anti-vibration meter bracket is required for installation.
*The speedometer can be used basically with stock mechanical meters (vehicles that use a meter cable) of the "60km/h=1, 400rpm" standard that is commonly used with Japanese models.This product cannot be used for foreign vehicles with different meter standards and some old vehicles.
*Exclusive for 12V battery vehicles.This product does not work properly on battery-less vehicles and vehicles with 6V batteries (including models converted to 12V electrical).
*It is not completely waterproof.The glass surface may become cloudy due to temperature differences and humidity inside and outside the meter.
*Removing the stock gauges may result in the loss of use of various indicators.Please prepare separately if necessary.
*The meter cable is a consumable item.If the outer tube is cracked or damaged, moisture, oil, dust, etc. may enter the meter and cause a failure.When replacing a mechanical meter, be sure to check the meter cable at the same time and replace it with a new one if necessary.
*The speedometer and tachometer are different from each other due to the difference of the internal structure and the color of the dial, which causes the difference of the luminous state (especially at night).
*The wiring of the harness must be modified to suit the vehicle.Please prepare the crimp terminal etc. separately.
*There may be changes in product specifications due to the manufacturer's reasons.
When requesting an inspection of a product, a receipt or other document that proves the date of sale is always required.