[Màn]
Chất liệu / Chất liệu: Polycarbonate
Cổ áo: Khói nhẹ
Kích thước: Cao 334mm x Rộng 295mm x Độ dày 3 mm
[Hệ thống lắp đặt]
Chất liệu / Chất liệu: Hợp kim nhôm
·Màu đen
Bề mặt: Xử lý phun cát, Hoàn thiện Anodized
・ [CONTENTS] : Thanh gắn, Kẹp trên, Kẹp MountBar, ScreenAd CHƯƠNG
[Spec.]
Nó có thể gắn vào bu lông.
Hiệu ứng chống gió lên
Có thể cài đặt lộn ngược
Điều chỉnh chiều cao và góc
* Hãy cẩn thận về hiện tượng hội tụ. Nghiêm cấm đỗ hoặc dừng xe khi ánh sáng mặt trời chiếu trực tiếp vào bên trong màn hình từ phía sau thân xe.
* Một loạt các bộ giáp bảo vệ ZETA có thể được cài đặt cùng một lúc, nhưng có thể cần phải điều chỉnh chính xác vị trí và góc lắp. Nếu bạn thay thế tay lái bằng chiều rộng tay lái ngắn hơn, hãy cài đặt nó do sự can thiệp của phanh vòi. Có thể không thể.
* Xin lưu ý rằng thông số kỹ thuật của sản phẩm có thể thay đổi do lý do nhà sản xuất.
[Windshield]
・Material: Polycarbonate
・Color: light smoke
・Size: Height 334mm X Width 295mm X Thickness 3mm
[mounting system]
・Material: Made of aluminum alloy
・Color: Black
・Surface: Sandblast treatment, Alumite finish
・Set Contents:Mounting bar, Upper clamp, Mounting bar clamp, Windshield adapter
[Specification]
・It can be installed on by bolt-on
・Improving windproof effect
・It can be mounted upside down
Height and angle can be adjusted.
*Be careful about the astringent phenomenon.It is strictly forbidden to park the vehicle with the sunlight shining directly on the inside of the windshield from the rear of the vehicle.There is a risk of heat accumulation and ignition due to astringent phenomenon.
*ZETA Armorguard can be mounted at the same time, but the mounting position and angle may need to be fine-tuned.If the handlebar is shorter than the width of stock handlebar, it may not be able to be installed due to interference with the brake hose.
*There may be changes in product specifications due to the manufacturer's reasons.