Xe máy tạo ra điện bằng Máy phát điện và lưu trữ điện trong Pin để sử dụng.
Khi dòng điện chạy từ máy phát đến pin, điện không thể sạc trong pin được tích lũy, gây ra tĩnh điện và ảnh hưởng xấu.
Extra GroundingHelper có thể ngăn chặn các tác động tiêu cực của tĩnh điện do dòng điện giữ lại cũng như hiệu suất điện động bằng cách truyền dòng điện vào Pin cho Smooth.
Nó được đặc trưng ở chỗ nó có thể đối phó hiệu quả với cả điện động lực và tĩnh điện cùng một lúc. Có hai loại cài đặt, Thiết bị đầu cuối pin và EarthPoint.
● Chất liệu của người trợ giúp tiếp đất
Bộ phận đầu cực của Pin được làm bằng kẽm - Được mạ bằng sắt hoặc Vật liệu: Sử dụng Bolt thép không gỉ.
Đây cũng là một điện trở quy mô lớn, cản trở dòng điện. Bu lông đầu cuối cũng được làm bằng kẽm Mạ cho sắt, cũng là điện trở.
Extra GroundingHelper là một lớp mạ sắt đặc biệt để giảm sức đề kháng, đồng thời kết hợp Máy giặt bằng đồng không oxy để giảm sức đề kháng càng nhiều càng tốt, và nhận ra một dòng điện trơn tru.
Đối với EarthPoint, máy giặt bằng đồng không có oxy có hình dạng đặc biệt được sử dụng và thiết bị được chế tạo để liên hệ trực tiếp với đầu dây nối đất.
● Tác dụng của người trợ giúp tiếp đất
Là một hiệu ứng động điện bằng cách truyền dòng điện vào Pin thành Smooth, bạn có thể trải nghiệm sự chiếu sáng của đèn, cải thiện phản ứng của động cơ, cải thiện mô-men xoắn tốc độ thấp, v.v.
Ngoài ra, bằng cách ngăn chặn tĩnh điện, bạn có thể mong đợi cải thiện hiệu suất nhiên liệu bằng cách giảm độ rung và âm thanh của động cơ và giảm tổn thất ma sát của từng bộ phận.
Motorcycles use a generator to generate electricity, which is then stored in a battery for use.
When the electricity flows from the generator to the battery, the electricity that is not fully charged in the battery brackets in the generator and has an adverse effect as static electricity.
The Bonding Helper can prevent the negative effects of static electricity caused by stagnant current, as well as dynamic electrical performance, by allowing electricity to flow smoothly to the battery.
It is characterized by its ability to effectively deal with both electrokinetic and static electricity at the same time.There are two settings, one for the battery terminal and one for the ground point.
●Effectiveness of Earthing Helper
The bolts at the battery terminals are zinc plated steel or stainless steel bolts.
This also has a large electrical resistance, which impedes the flow of electricity.The terminal bolts are also made of steel and galvanized, and they also provide resistance.
The bonding helper is made of steel with special plating to reduce resistance, and at the same time, it is combined with oxygen-free copper washers to reduce resistance as much as possible and realize smooth flow of electricity.
For the ground point, a specially shaped oxygen-free copper washer is used to make direct contact with the end of the ground wire.
●Effectiveness of Earthing Helper
The dynamic electrical effects of the smooth flow of electricity to the battery include increased illumination of the lights, improved engine response, and increased low-speed torque.
Also, by preventing static electricity, it is expected to reduce engine vibration and noise, and improve fuel efficiency by reducing friction loss in each part.