Đó là ForkEm FlagKit để sử dụng độc quyền MONKEY125.
Số lượng biểu tượng và giá treo khung HONDAThree: Nó được đặt.
Chất liệu Nhật Bản: Khung thép không gỉ, Biểu tượng ba chiều: Nó được đặt.
Độ bền tuyệt vời, vật liệu có độ bền cao với độ dày 2.0mm: Đó là thép không gỉBrasketSpec.
[phương pháp cài đặt]
1.OEMFender (Vui lòng xóa toàn bộ Khung Fender) , Loại bỏ Sừng khỏi xe.
2. [CONTENTS] Lắp ráp Chân đế và Grommets. Nếu Grommets không vừa trong Chân đế, hãy ngâm trong nước để làm mềm Cao su và sau đó lắp ráp.
3. Đặt lại giá đỡ cho Giá đỡ đi kèm thành 2 miếng ở mặt trước của Giá đỡ OEMFender bằng cách sử dụng lại BoltM OEMM 6. Để điều chỉnh độ dày của giá đỡ OEM, Máy giặt M6Flat được bao gồm ở mặt sau của Giá đỡ Fender (Lớn) Sử dụng.
4. Chèn biểu tượng vào Grommet và cài đặt. Nếu Grommet trượt chậm, hãy thổi một lượng nhỏ bình xịt Silicon.
It is a fork emblem kit only for Monkey 125.
The set includes the HONDA emblem and the installation bracket.
This set includes a stainless steel bracket and a 3D emblem made in Japan.
The bracket is made of high-strength stainless steel with a thickness of 2.0 mm.
[How to install]
1. Remove the stock fender (remove the fender bracket) and horn from the vehicle.
2. Assemble the brackets and grommets in the set.If the grommet does not fit into the bracket, soak it in hot water to soften the rubber before assembling.
3. Tighten the attached brackets to the two front fender brackets reusing the stock M6 bolts.Use the supplied M6 flat washer (large) on the back side of the fender bracket in order to adjust the thickness of the stock bracket.
4. Insert the emblem into the grommet and complete the installation.If the grommets do not slide well, spray them with a small amount of silicone spray.