Trải nghiệm sự khác biệt trong việc chạy với bánh xe trọng lượng nhẹ!
Không phải nói quá khi nói rằng nó có ảnh hưởng lớn nhất đến việc điều khiển Xe máy theo ý muốn.
Đó là khái niệm "Thể thao tại Harley-Davidson" của Bell Fast, người là một phần cần thiết bằng mọi cách để làm cho mọi thứ trở thành hiện thực, đối với HARLEYCustomWheel "Gruid" Nó được sinh ra bởi Cộng tác với Active Inc. mà phát triển.
■ Thiết kế
Mặt cắt ngang hình chữ thập hoài cổ 6 Thiết kế Spoke.
Mặt cắt ngang thiết kế Spoke phù hợp với thiết kế Harley-Davidson Spoke áp dụng thiết kế hoài cổ trong khi góc nói là 60 độ 6 là tuyệt vời trong phân tán ứng suất, rất cân bằng để theo đuổi độ cứng và giảm trọng lượng Một cấu trúc tốt, có thể nói rằng đó là một hình dạng mà chúng tôi đã đạt được để đạt được cả thiết kế và hiệu suất. Bộ cài đặt hai màu, Vàng để nhắc nhở cảnh Race cũ và Đen bóng để thắt chặt đôi chân của bạn.
Dòng Smooth dính vào chi tiết.
Trong Custom của Harley - Davidson, không được phép thỏa hiệp giao diện để có được hiệu suất. Thiết kế của BG 6 này đã được hoàn thành mà không có bất kỳ sự thỏa hiệp nào.
Đặc biệt là thiết kế tăng lên trong khi trải đều xung quanh trung tâm là một điểm quan trọng để tạo ra toàn bộ Khối lượng Bánh xe và định hướng độ sâu.
■ THÔNG SỐ KỸ THUẬT
Giảm trọng lượng của bánh xe cải thiện hiệu suất tập thể dục.
"Tăng tốc" của xe máy ・ "Giảm tốc" ・ "Biến" Hiệu ứng trọng lượng lớn đối với ba hành động này là trọng lượng dưới trọng lượng của Spring Wheel chiếm trọng lượng lớn trong số các trọng lượng thấp hơn của mùa xuân. Việc giảm cân của Weel giúp cải thiện hiệu suất tập thể dục và cải thiện xe máy.
[Phương pháp sản xuất rèn nhôm giúp đạt được cả việc giảm trọng lượng và đảm bảo độ bền.]
Đây là một phương pháp sản xuất được gọi là Nhôm rèn, đạt được các yêu cầu mâu thuẫn về giảm trọng lượng và độ bền của Bánh xe ở mức cao.
Bánh xe đúc chung được thiết kế để có độ dày nhất định ở phần Vành nhằm đảm bảo độ bền, nhưng Bánh xe rèn có thể đảm bảo đủ cường độ để độ dày thành của phần Vành có thể được thực hiện ở giới hạn nhỏ nhất Bánh xe rèn xoay làm suy yếu Hiệu ứng GYRO và nhận ra sự sụp đổ nhanh chóng của Xe máy tại Góc.
Harley-Davidson OEMWheel cũng đã áp dụng Spoke mặt cắt ngang. Dù nó là một hình thức từ lâu, trên thực tế, nó là một thiết kế rất hợp lý để tiết kiệm trọng lượng và đảm bảo sức mạnh.
Bánh xe rèn Đó là lý do tại sao có thể giảm trọng lượng của Rim đến giới hạn. Active tự hào Bánh xe rèn nhôm "GALE TỐC ĐỘ" "Gruid" là một tinh thể của công nghệ thiết kế.
[Chất lượng cao và an toàn.]
Được xác định bởi Bộ Đất đai, Cơ sở hạ tầng và Giao thông vận tải "Phương tiện tiêu chuẩn kỹ thuật phương tiện của bánh xe đĩa do Mitsui Gold Inc." Bánh xe nhôm được bán tại FOR JAPAN MODEL của JWL (JWL-T) Bắt buộc phải hiển thị Mark.BG6 cũng trải qua các đợt kiểm tra nghiêm ngặt về cường độ va đập và độ bền mỏi, cũng như tiêu chuẩn JWL [Màu] Ngoài ra, việc lắp đặt Trung tâm đính kèm, lắp nút ấn, xoay bánh xe, kiểm tra ngoại hình được thực hiện bởi đội ngũ nhân viên lành nghề, nhận ra chất lượng cao và an toàn.
[XL 1200 C SPORTSTER 1200 với Mặt trước 19 inch, Phía sau 18 inch.]
XL 1200 C Sự lựa chọn được thực hiện để làm cho SPORTSTER 1200 trở nên thể thao hơn là Mặt trước 19 inch, Phía sau 18 inch. Phía sau 18 inch cũng được áp dụng trong XL 1200 CX R 100 ROADSTER được bán vào năm 2016 là Silhouette gợi nhớ đến cựu tay đua Cafe Mang đến một sự thay đổi lớn cho hình ảnh của XL 1200 C SPORTSTER 1200. Ngoài ra, bằng cách đặt chiều rộng Vành của Reim thành 4.0 Inch, có thể cài đặt Lốp xe có chiều rộng Lớn tối đa 150.Ti
■ Kích thước bánh xe
Mặt trận: 250-19 (Kích thước lốp khuyến nghị: 100 / 90-19)
Phía sau: 400-18 (Kích thước lốp khuyến nghị: 150 / 70-18)
Experience the difference in driving with lightweight wheels!
It is no exaggeration to say that the wheel has the greatest impact on the ability to control a motorcycle at will.
In order to realize Belfast's concept of "Sporting on Harley-Davidson", the wheel was a necessary part, and it was born by the collaboration with Active Co.
■Design
Nostalgic cross-section 6-spoke design.
Cross-sectional 6-spoke design is adopted to match Harley-Davidson.Despite the nostalgic design, the 6-spoke design with a 60-degree angle provides excellent stress distribution and a well-balanced structure for pursuing rigidity and weight reduction.It is a shape that has been arrived at in order to achieve both design and performance.Two colors are available: gold, reminiscent of the good old days of racing, and gloss black to enhance the feet.
Smooth lines with attention to detail.
In the customization of Harley-Davidson, it is not allowed to compromise the looks in order to get the performance.The design of the BG6 was completed without any compromise.
In particular, the design of the hub area, which spreads out smoothly and rises up, is an important point to produce the volume and depth of the entire wheel.
■Specifications
Lighter wheels improve performance.
The unsprung weight of a motorcycle has a great influence on these three actions: acceleration, deceleration, and turning.The weight of the wheel is the largest part of the weight under the spring.By reducing the weight of the wheel, the performance of the motorcycle is improved and the enjoyment of riding the motorcycle at will is enhanced.
[Aluminum forging process for both weight reduction and strength assurance.]
Forging aluminum is a process that achieves a high level of compatibility between the conflicting requirements of reducing wheel weight and securing strength.
In general, cast wheels are designed to have a certain amount of thickness in the rim section in order to secure strength, but forged wheels can secure sufficient strength, so it is possible to minimize the thickness of the rim section.A forged wheel with a lighter spinning circumference reduces the gyroscopic effect and makes the motorcycle quicker in cornering.
The cross-section spokes used on genuine Harley-Davidson wheels.Although it is a traditional shape, it is actually a very reasonable design for weight saving and strength securing.
Forged wheels make it possible to reduce the weight of the rim to the utmost limit.This is the culmination of Active's "Gailspeed" and "Glide" forged aluminum wheel design technology.
[High quality and safety.]
In accordance with the "Technical Standards for Light Alloy Disc Wheels for Passenger Cars" set forth by the Ministry of Land, Infrastructure, Transport and Tourism, aluminum wheels sold in Japan are required to display the JWL (JWL-T) mark.Of course, BG6 is also tested for impact and fatigue resistance, and has passed the JWL standard.The installation of hub attachments, press fitting of bearings, wheel runout, and appearance checks are performed by skilled staff to ensure high quality and safety.
[19 inches front, 18 inches rear on the Sportster.]
To make the Sportster more sporty, I chose 19 inches front and 18 inches rear.Also available on the XL1200CX Roadster in 2016, the rear 18-inchers bring a big change to the Sportster's image with a silhouette reminiscent of the café racers of yesteryear.The rear rim width is 4.0 inches, which allows for tires up to 150 wide to be mounted.You can also choose from a wide range of tyres.
Wheel size
Front :250-19(Recommended tire size:100/90-19)
REAR:400-18(Recommended tire size :150/70-18)