Chiều rộng tiêu chuẩn của Swingarm cho Khung nhôm GC-019, GC-020 (Đối với trung tâm khỉ) Swingarm, chiều rộng giống như OEMSwingarm của MONKEY (Chiều rộng 167-170mm) Trong được chế tạo Swingarm.
Ngoài việc có thể sử dụng trung tâm MONKEYOEM như nó được, GCraftProductNo : Bạn có thể sử dụng trung tâm ổ đĩa phía sau là 39053.
Drum, là Swingarm tương ứng với cả hai đĩa.
Mạnh "Mặt cắt ngang hình mắt. "Swingarm hình tam giác vuông là một ống chứa hơn 80% hỗ trợ cho Người dùng như 16 cm trở lên.
■ Mô tả Tùy chọn
[Swingarm kết thúc]
- Hoàn thiện Anodized đen (số phần của GCraft : 60198) Tasu25000 yên
- Kết thúc SeraCoat (số phần của GCraft : 60807) Tasu30000 yên
[SeraCoat là gì?]
SeraCoat là một loại sơn do NIC sản xuất, hiện đang được sử dụng trong các đội quân của Hoa Kỳ, sơn đặc biệt, sơn lạnh.
Đó là sơn đã được kiểm tra để có thể đối phó với các điều kiện khắc nghiệt và được nghiên cứu thực hiện để thực hiện, chẳng hạn như chịu nhiệt, chống mài mòn, độ bền, dung môi kháng, tản nhiệt, cách nhiệt vv..
Ceramic được nghiền bằng một máy đặc biệt và được trộn thành sơn để cải thiện độ bền của màng sơn. Do đó, nó trở thành một bề mặt giống như satin, nhưng lớp phủ có thể được làm rất mỏng (25Micron)
Dấu hàn (Bead) Nó cũng có thể để lại mà không trốn.
Độ bám dính là giá trị cao nhất trong số các vật liệu phủ, không thể làm nếp nhăn ngay cả khi xếp lại, sơn khó bóc ngay cả trong các tảng đá, vì vậy nó thích hợp cho việc xử lý bề mặt khung, mặt nạ.
* Sẽ bị tính theo thời gian giao hàng bình thường + 3-5 tuần.
[Tùy chọn : Thanh trượt ChainSec. ]
Thanh trượt chuỗiBolt stop Spec. (GCraftProductNo : 60228) 1000 yên
Thay đổi thanh trượt của Chuỗi từ Nút đinh để Ngăn chặn. Dễ dàng thay thế khi mòn.
[Tùy chọn : Stand HookBase chế biến bổ sung]
Stand HookBase (M6) Chế biến bổ sung (GCraftProductNo : 60903) +3000 Yên
GCraft đã làm Stand Hook hoặc bên ngoài công ty đã làm Stand Hook, (M6) Có thể gắn kết.
[Tùy chọn : Phần xoay (Φ 12) Spec. ]
Phần xoay cánh tay xoay Φ12Spec. (GCraftProductNo : 60898)
Tay swing Đây là một lựa chọn để thiết lập trục pivot đến Φ12. Khung bên cũng cần Φ12.
Trục chuyên dụng, với chi Nut.
[Tùy chọn : Chuỗi kéo Spec. ]
Tùy chọn kéo chuỗi
- Đếm HookSpec Đứng Xuống. (Số phần của GCraft : 60186) +3000 yên
Một chuỗi kéo cổ điển Stand HookSpec. Và để. Số phần của GCraft : 32071 - 32072 - 32073 Có thể lắp đặt Hook Đứng.
* Số phần của GCraft : 33170APLockheed caliperSố hỗ trợ không được gắn kết (Và can thiệp)
- Đằng sau loại kéo (số phần của GCraft : 60221) +3000 yên
Bộ điều chỉnh được thiết kế để loại bỏ việc bảo trì rắc rối của việc điều chỉnh dây chuyền.
Núm điều chỉnh đến phần phía sau của Swingarm, vì vậy bạn có thể dễ dàng điều chỉnh phần Điều chỉnh khó mà xoay do sự can thiệp của công cụ vv.
* Chân đế Đua Ngựa. Không được phép cài đặt đồng thời OWType
- OWType (số phần của GCraft : 60014) +3000 yên
Bằng cách xử lý phần Xích bằng Taper, chúng tôi đã loại bỏ khoảng trống trên và dưới của Trục Trục.
Kể từ khi Piece di chuyển, không có khoảng trống trên và dưới. Đây là một cơ chế được thông qua bởi Swingarm của Big bike.
- OWType Racing Stand HookSpec. (Số phần của GCraft : 60188) +5000 Yên
Đối số OWTypeChain phía sau giá đỡ HookSpec. thay đổi thành.
Số phần của GCraft : 32071 - 32072 - 32073 Có thể lắp đặt Hook Đứng.
* Số phần của GCraft : 33170APLockheed caliperSố hỗ trợ không được gắn kết (Và can thiệp)
- Loại bất thường (số phần của GCraft : 60059) +5000 Yên
Nó là một phép trừ Chuỗi của công thức Eccentric thường thấy trong xe máy Kawasaki.
* DiscSpec. , Bạn chỉ có thể sử dụng hỗ trợ Caliper của loại với Caliper đính kèm ở dưới cùng của Swingarm.
* Đối với Wide WheelSwingarm là discSpec. Chỉ sẵn có trong.
GC-019, GC-020 Standard Width swingarm for Aluminum Frame (for Monkey Hub) swingarm is made with the same width (167-170mm wide) as the stock swingarm of Monkey.
The stock Monkey hub can be used as it is, and the rear disc hub of G-Craft part number: 39053 can be used.
This swingarm is compatible with both drum and disc.
The triple square pipe swingarm has a strong "figure of the eye" cross-section and is popular with over 80% of users who choose a 16cm or longer pipe.
■Option Description
[Swingarm finish]
・Black anodized finish (G-Craft part number: 60198)
・Cerakote finish (G-Craft part number: 60807)
[What is Cerakote?]
Cerakote is a special heat coloring and normal temperature paint manufactured by NIC and currently used by the US military.
It has been inspected to meet the harsh conditions, and has excellent heat resistance, abrasion resistance, durability, solvent resistance, heat dissipation, heat insulation and other performance-oriented research and production.
Ceramic is crushed by a special machine and mixed into the paint to improve the strength of the paint film.Therefore, the surface becomes pear-shaped, but the coating film can be made very thin (25 microns)
Weld marks (beads) can be left on the surface without being hidden.
The adhesion is the highest among all coating materials, and the surface treatment is suitable for frames and swingarms because it does not wrinkle even when bent, and the paint does not peel off easily even by stepping stones.
*Please allow 3 to 5 weeks for normal delivery.
[Options: Chain Slider Specifications]
Chain slider bolt fixing specification (G-Craft part number: 60228)
Change the chain slider from riveted to bolted.Easy to replace when worn out.
[Options: Additional processing of stand hook base]
Stand hook base (M6) additional processing (G-Craft part number: 60903)
G-Craft stand hook or aftermarket stand hook (M6) can be attached.
[Options: Pivot section (Φ12) specification]
Swingarm pivot part Φ12 specification (G craft part number)60898)
It is an option to make the swingarm pivot part Φ12.The frame side also needs to be Φ12.
Special shaft and nut included.
[Options: Chain pull specification]
Chain pull option
・Racing stand hook specification (G-Craft part number: 60186)
The rear part of the conventional chain pull can be used as a stand-hook.G-Craft Part Number: The 32071, 32072 and 32073 racing stand hooks can be installed.
*G Kraft Part Number:33170AP Lockheed caliper support cannot be installed (will interfere)
・Back pull type (G-Craft part number: 60221)
This backward pull adjuster is designed to eliminate the hassle of adjusting the chain.
Since the adjusting nut is located at the end of the swingarm, it is easy to adjust the adjusting part which was difficult to turn due to interference of tools
*Can not be installed on the racing stand hook specification and OW type at the same time
・OW type (G-Craft part number: 60014)
The chain puller is tapered to eliminate vertical misalignment of the axle shaft.
The tapered frame moves so there is no vertical misalignment.This mechanism is also used for swingarms of big bikes.
・OW type racing stand hook specification (G-Craft part number: 60188)
The rear part of OW type chain pull is changed to stand hook specification.
G-Craft Part Number: The 32071, 32072 and 32073 racing stand hooks can be installed.
*G Kraft Part Number:33170AP Lockheed caliper support cannot be installed (will interfere)
・Eccentric type (G-Craft part number: 60059)
This is an eccentric type chain puller commonly found on Kawasaki motorcycles.
*Only caliper supports with calipers attached to the lower part of the swingarm can be used on disc models.
*Swingarm for wide wheel can be used only with disc specification.