Tiêu thụ điện năng : 21. 2W-36. 5W
PUSH SWITCH Loại
Mặc dù thường ở dưới 125 cc, nếu bạn gắn nó vào một chiếc xe máy với công suất pin ít hơn, ít điện hơn, không chỉ nó sẽ không làm nóng, nhưng pin sẽ tăng lên.
(Pin ở nước ngoài và pin bị hư hỏng sẽ giống nhau).
Nó không thể được sử dụng cho một chiếc xe Suzuki với ít điện năng hơn hoặc một chiếc xe Honda với một pin ít hơn 7 S.
Yamaha có thể được sử dụng với pin được trang bị 4 B 5 hoặc nhiều hơn. Ngay cả khi nó có thể được sử dụng, sức mạnh sẽ được tắt cho idling và xe máy giảm xuống dưới 12V trong vòng quay thấp.
Theo sự khác biệt cá nhân của chiếc xe đạp
[Power consumption] 21.2W-36.5W
[Type] Push-switch type
*The stock optional grip heaters manufactured by Honda have a half-wound heating wire, but this product has a full-wound heating wire.The power consumption is higher than that of Honda's optional grip heaters, and starting and using the grip heaters at max heat immediately after engine startup will significantly drain the life of the on-board battery.The life of the battery and electrical system will be extended if the bike is sufficiently ready for startup after the engine has been started, idled, and run 2-3 km.
*Since motorcycles are not power generators, do not use them recklessly. Instead, use the surplus electrical power of the motorcycle gradually. This approach is gentle on the motorcycle.Also, please consider the use of a handlebar cover to increase the overall effect of thermal protection and warmth under low power use.Since the wind blows on your hands and they get cold, if you can physically block the wind, your hands will be less likely to get cold and heat will accumulate.
*With the recent trend toward expansion of electrical components, we have heard from many customers that only the grip heater option is not enough.Motorcycles move by burning fuel, and their explosive power is also used to generate electricity, powering various electrical equipment. Therefore, when considering installation, it is important to first discuss with your bike shop about the essential and preferable options for your bike's electrical accessories. We kindly ask for your careful consideration after consulting with the shop before proceeding with the installation.
*The power demand is so high that even if the system can be used at level 5 of the 5 maximum heat levels when riding on highways or expressways, the battery protection function may automatically stop the power supply when the bike is stopped in traffic jams or at traffic lights.In such a case, please make sure to start up and use it again after reaching cruising speed.
*When installing on a stock or aftermarket throttle tube, it is recommended to warm up the throttle tube before installation to allow for thermal expansion and easier installation.
*Full cowl bikes and scooters may require more labor and may require a longer period of time since the wiring cowl will be threaded during installation.Also, since it is an electrical component, the location for supplying electricity may vary depending on the bike for the optional coupler or surplus wiring. Even if the grip length that can be installed is long, if the wiring work for supplying power is technically difficult and cannot be installed during storage, it could be a problem.Before proceeding, please consult with the bike shop in advance and consider it.
Regarding the corresponding throttle pipe, please thoroughly check the condition of the stock parts and the stock part number. Also, carefully consider that depending on the length of the grip heater, it may not be possible to use stock bar ends.
*In recent times, there has been remarkable progress in motorcycle equipment, and many bikes are now equipped with high-quality components such as heated grips as standard features upon delivery.In this case, please confirm not only this compatibility data but also the actual condition of the bike with the bike dealer.
*This is a common case for bikes under 125cc, but if installing it on a bike with low battery capacity and power generation, not only will it not warm up, but the battery will run out. (the same applies to overseas made batteries and deteriorated batteries).
*This product cannot be used for SUZUKI vehicles with low power generation or HONDA vehicles with batteries of less than 7S.
*For YAMAHA, it can be used on the vehicles with 4B5 or higher batteries.Also, even if you can use it, the power supply will be turned off when the motorcycle drops below 12V at idling or low RPM.
*Sometimes, depending on the individual difference of each bike, the power supply is cut off due to insufficient voltage when the bike is turned on to full power.
*Images may contain other products.
*There may be changes in product specifications due to the manufacturer's reasons.