[Chiều cao ghế ngồi : Khoảng 25mm xuống]
màu : Tranh Đen
Vật chất : Thép
* Chúng tôi đã liên tục phát triển một tính toán và kiểm tra thực tế lái xe của tỷ lệ liên kết cho từng loại xe. Vui lòng dừng gắn nó cùng với các bộ phận giảm tốc khác để tăng số lượng giảm xuống của sản phẩm này bởi vì nó làm giảm tính ổn định của lái và giảm giá. Ngoài ra, hãy đảm bảo kiểm tra mỗi lần rà phá trong quá trình thay thế các bộ phận như hệ thống xả, hệ thống treo và lốp, và hãy ngừng sử dụng sản phẩm này trong trường hợp không đủ.
* Số tiền giảm giá là một giá trị tham chiếu trên cơ thể STD (Bốc dỡ). Nó không gắn các bộ phận gắn trên xe để tăng tải ban đầu ở phía sau, xin lưu ý rằng nó khác với điều kiện treo sau.
* Góc sẽ hơi xuất hiện sau khi lắp vào thân xe cùng với tính chất của sản phẩm. Hãy chắc chắn xoay tay lái sang trái. Hãy đỗ xe của bạn bằng cách nghiêng cơ thể xe sang trái. Hãy đảm bảo kiểm tra độ nghiêng của bề mặt đường và các tình huống xung quanh, và đừng đỗ xe ở nơi mà cơ thể xe hơi nghiêng ở bên phải. Nó đòi hỏi sự chú ý đặc biệt khi gắn khung phía sau.
* Hãy chắc chắn tham khảo công việc hướng dẫn sử dụng dịch vụ của nhà sản xuất xe, các công cụ được chỉ định (Có thể sử dụng sản phẩm thương mại. ) Trong quá trình cài đặt.
* [Rear Lowdown Link Rod] Là tên sản phẩm. Một số hình dạng cũng có sản phẩm khác nhau.
* Sản phẩm trên ảnh số # 2 sau khi giảm xuống. Sản phẩm trên ảnh # 3 nằm trong điều kiện STD.
[Seat height: Lowered by approx. 25mm]
Color: Black paint finish
Material: Steel
*The manufacturer is developing the link ratio calculation and actual driving test repeatedly for each model.In general, the larger the amount of lowering, the worse the maneuverability. Please do not install other lowering parts at the same time to increase the amount of lowering of this product.If you have replaced the exhaust, rear suspension, tires or other parts, be sure to check the clearance of each part of the rear suspension at full stroke, and if sufficient clearance cannot be obtained, do not use this product.
*The amount of lowering is a reference value with a stock body (no load).It depends on the condition of the rear suspension (including setting and sagging) and whether or not there are any body accessory parts installed that increase the initial load around the rear.
*Because of the characteristics of the product, the angle of the vehicle body when parked will be raised after installation.Always park with the steering wheel turned to the left and the vehicle tilted to the left.Check the slope of the road surface and the surrounding conditions carefully, and never park the vehicle in a place where it will lean to the right.Special care is required when installing a rear box.
*When installing the product, be sure to have the service manual specified by the vehicle manufacturer and the specified tools (commercially available tools are also acceptable).
*"Rear Low Down Link Rod" is a product name.Some products may have different shapes.
*Image 2 is after lowering and image 3 is stock.