Đường kính : Φ36
Cơ sở : TMR36-D9
Bộ chế hòa khí : 77-93-77
Đường kính ngoài : 42mm
Chiều dài tổng thể : 48mm
[Các bộ phận yêu cầu riêng biệt trong quá trình cài đặt]
Nó đòi hỏi một trong hai thiết lập của bộ điều chỉnh công tắc sau.
Khung bộ phận cơ thể của TMR Large Body YOSHIMURA Racing (L = 850mm)
TMR Large Body (Với Chuyển đổi) Bộ giữ tay ga YOSHIMURA Racing (L = 850mm) (Cần thay đổi đường dây của bộ nối phía switch. )
[Các bộ phận yêu cầu riêng biệt]
YOSHIMURA Bể chứa dầu Breather Tank
Băng cách điện (40-60)
GPz1100F Bộ nạp không khí làm mát (Sản phẩm OEM KAWASAKI)
* Dây ga tiết lưu hoạt động bình thường.
Chiều dài yêu cầu có thể khác nhau tùy thuộc vào cách xử lý.
* Hình ảnh chỉ để tham khảo. Nó có thể khác với sản phẩm thực tế.
Intake Diameter:Φ36
Base Body:TMR36-D9
Carburetor Pitch :77-93-77
Spigot Outer Diameter :42mm
Spigot Length :48mm
[Separately required parts for installation]
Either of the following throttle holder sets is required.
・Yoshimura Racing Throttle Holder Set for TMR Large Body (L=850mm)
・Yoshimura Racing Throttle Holder Set for TMR Small Body with Switch (L=850mm) (Switch side coupler wiring required to be changed)
[Parts required separately]
・Yoshimura Oil Breather Tank Kit
・Insulator Band (40-60)
・GPz1100f air cooled intake manifold (KAWASAKI stock)
*The length of the throttle wire is the standard setting.Please note that it may vary depending on the installation method.
*Images are for reference only.
*If the fuel cock interferes with the installation, it may be possible to avoid it by replacing the cock with an external cock such as Pingel (not available for vehicles with fuel pump).
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.