- Phù hợp:
- SUZUKI V STROM 650 23 8BL-C733M
- SUZUKI V STROM 1050 23 8BL-EF11M
- HONDA CB125R 18 JC79
- HONDA CB400SF 99 NC39 [Frame No.]NC39-1000001 to 1007220
- HONDA CB400SF 98-21 NC31 Ver.S [Frame No.]NC31-1600001 or later
- ...và hơn thế nữa.
순정 풋페그 대비 무게도 가볍고 디자인 적으로도 완성도가 높습니다.
주행중 풋페그에서 미끄러지거나 하느 불상사는 없습니다.
각도 조절이 가능하고 설치가 아주 쉽습니다.
순정 풋페그의 아저씨 같은 느낌이 없어집니다.
설치 추천 드립니다.Đọc thêm - Phù hợp:
- HONDA X4 TypeLD 97-01 (SC38)[Place of use]Front[Required quantity]2
- HONDA X4 TypeLD 97-01 (SC38)[Place of use]Rear[Required number]1
- HONDA XLR250R 91-94 (MD22)[Place of use]Rear[Required number]1
- HONDA CBR250R 88-89 (MC19)[Where used]Front[Required number]1
- HONDA VFR400R 87 (NC21)[Place of use]Front[Required number] 4
- ...và hơn thế nữa.
A bit longer than intended for the front caliper. Maybe the pin I received is for the rear. But it fits properly on the front caliper anyway.Đọc thêm - Phù hợp:
- HONDA X4 TypeLD 97-01 (SC38)[Place of use]Front[Required quantity]2
- HONDA X4 TypeLD 97-01 (SC38)[Place of use]Rear[Required number]1
- HONDA XLR250R 91-94 (MD22)[Place of use]Rear[Required number]1
- HONDA CBR250R 88-89 (MC19)[Where used]Front[Required number]1
- HONDA VFR400R 87 (NC21)[Place of use]Front[Required number] 4
- ...và hơn thế nữa.
today i change the rear brake rotor and overhaul the caliper. the brake pin has seriously rusted and damaged so i cleaning all the surface of caliper and (not changed caliper piston...and Oring) and l...Đọc thêm - Phù hợp:
- HONDA X4 TypeLD 97-01 (SC38)[Place of use]Front[Required quantity]2
- HONDA X4 TypeLD 97-01 (SC38)[Place of use]Rear[Required number]1
- HONDA XLR250R 91-94 (MD22)[Place of use]Rear[Required number]1
- HONDA CBR250R 88-89 (MC19)[Where used]Front[Required number]1
- HONDA VFR400R 87 (NC21)[Place of use]Front[Required number] 4
- ...và hơn thế nữa.
First, let me say that this is a special case based on a combination of several conditions.After cleaning the Caliper, I put it back together, tightened the pad pin, and was finishing up by tightening...Đọc thêm - Phù hợp:
- SUZUKI BURGMAN400 18-22 [Where used]Front right side
- TRIUMPH TIGER1050 08-09 [Used in]Rear
- YAMAHA TZ50 90 [Where used] Front
- YAMAHA TZR50 90-92 [Used area]Front
- YAMAHA TZR50R 93-99 [Used in]Front
- ...và hơn thế nữa.
It is used for NSR50 and NS50F.If you are thinking of playing with Circuit on a Mini bike, etc., please use it.It stops well in circuit driving and is perfectly maneuverable.It is not that expensive, ...Đọc thêm - Phù hợp:
- HONDA X4 TypeLD 97-01 (SC38)[Place of use]Front[Required quantity]2
- HONDA X4 TypeLD 97-01 (SC38)[Place of use]Rear[Required number]1
- HONDA XLR250R 91-94 (MD22)[Place of use]Rear[Required number]1
- HONDA CBR250R 88-89 (MC19)[Where used]Front[Required number]1
- HONDA VFR400R 87 (NC21)[Place of use]Front[Required number] 4
- ...và hơn thế nữa.
For those who want to upgrade with OEM replacementIt's hard to lick, hard to decay, and also cool.Recommended for people who ride Honda motorcycles, but be careful with the length.Đọc thêm - Phù hợp:
- SUZUKI BURGMAN400 18-22 [Where used]Front right side
- TRIUMPH TIGER1050 08-09 [Used in]Rear
- YAMAHA TZ50 90 [Where used] Front
- YAMAHA TZR50 90-92 [Used area]Front
- YAMAHA TZR50R 93-99 [Used in]Front
- ...và hơn thế nữa.
I purchased this product to replace the Brake Pads on my W800.Since I drive a slightly older model W, I had a strong perception that Rear was Drum, so I bought it without looking carefully.I have to b...Đọc thêm - Phù hợp:
- KAWASAKI ZXR250R 90 [Frame No.]ZX250A-301501 or later
- KAWASAKI ZXR400 89 [ZX400] [Frame No.]ZX400H-000001 or later
- KAWASAKI ZXR250 95 [Frame No.]ZX250C
- KAWASAKI ZXR250 99 [Frame No.]ZX250C-020001 or later
- KAWASAKI ZXR250R 89 [Frame No.]ZX250A-300001 or later
- ...và hơn thế nữa.
I've been sticking with the Tokico 6 pods. This time I adopted CaliperOverhaul and baked paint instead of OEM. I think it's a good corrosion protection. I've heard that some people use seal tape to pr...Đọc thêm - Phù hợp:
- SUZUKI SKYWAVE400 burgman 07-16 *CK44A/CK45A [Where used]Front right side
- SUZUKI SKYWAVE250 burgman 07-12 *CJ44A/CJ45A/CJ46A [part used]Front
- SUZUKI SKYWAVE250 burgman SS 07-12 *CJ44A/CJ45A/CJ46A [part used]Front
- SUZUKI SKYWAVE250 burgman Type S 07-12 *CJ44A/CJ45A/CJ46A [part used]Front
- SUZUKI SKYWAVE250 burgman TypeM 07-12 *CJ44A/CJ45A/CJ46A [part used]Front
- ...và hơn thế nữa.
[How is it used?Using Repeat on Ninja250RRear.Application:Mountain pass, Touring1st time:Replaced with OEMPad.Second:Exchange Red Pad to Red Pad.Was the one you received as per Image?Just like the ima...Đọc thêm - Phù hợp:
- SUZUKI 250SB 02-04
- KAWASAKI KX250 05-08
- SUZUKI RMX250S 96-99
- SUZUKI RM125 07-08
- KAWASAKI KX250 03-04
- ...và hơn thế nữa.
[How is it used?Used by D TrackerRear.Applications:Motard race, Touring, Off-road, Enduro3Quantity in about 8 years:Buy SetRepeat.Was the one you received as per Image?Just like the image. The Red col...Đọc thêm - Phù hợp:
- HONDA NSR50 -99
- HONDA NS-1 91-99
- HONDA NSR80 -99
I used an XLR80 Frame with an APE 100 Engine and a carburetor with a TM-MJN24.The XLR80 itself is NORMAL and High Solo, so I don't feel much Merit as High Solo, but I am satisfied because I can now pu...Đọc thêm - Phù hợp:
- SUZUKI SKYWAVE400 burgman 07-16 *CK44A/CK45A [Where used]Front right side
- SUZUKI SKYWAVE250 burgman 07-12 *CJ44A/CJ45A/CJ46A [part used]Front
- SUZUKI SKYWAVE250 burgman SS 07-12 *CJ44A/CJ45A/CJ46A [part used]Front
- SUZUKI SKYWAVE250 burgman Type S 07-12 *CJ44A/CJ45A/CJ46A [part used]Front
- SUZUKI SKYWAVE250 burgman TypeM 07-12 *CJ44A/CJ45A/CJ46A [part used]Front
- ...và hơn thế nữa.
I bought the brake pad because it was worn out.
Among Daytona products, there are red brake pads and gold.
Personally, I like red more.
Red is durable and has similar braking power.
The pad I used be...Đọc thêm - Phù hợp:
- SUZUKI 250SB 02-04
- KAWASAKI KX250 05-08
- SUZUKI RMX250S 96-99
- SUZUKI RM125 07-08
- KAWASAKI KX250 03-04
- ...và hơn thế nữa.
I bought the brake pad because it was worn out.
Among Daytona products, there are red brake pads and gold.
Personally, I like red more.
Red is durable and has similar braking power.
The pad I used be...Đọc thêm - Phù hợp:
- HONDA X4 TypeLD 97-01 (SC38)[Place of use]Front[Required quantity]2
- HONDA X4 TypeLD 97-01 (SC38)[Place of use]Rear[Required number]1
- HONDA XLR250R 91-94 (MD22)[Place of use]Rear[Required number]1
- HONDA CBR250R 88-89 (MC19)[Where used]Front[Required number]1
- HONDA VFR400R 87 (NC21)[Place of use]Front[Required number] 4
- ...và hơn thế nữa.
Rust resistant Material:Stainless SteelPad pin。It is a little bit longer for one push for Caliper, but it can be used as it is with OEM and replacement.Features easy maintenance and performance retent...Đọc thêm - Phù hợp:
- KAWASAKI ZXR250R 90 [Frame No.]ZX250A-301501 or later
- KAWASAKI ZXR400 89 [ZX400] [Frame No.]ZX400H-000001 or later
- KAWASAKI ZXR250 95 [Frame No.]ZX250C
- KAWASAKI ZXR250 99 [Frame No.]ZX250C-020001 or later
- KAWASAKI ZXR250R 89 [Frame No.]ZX250A-300001 or later
- ...và hơn thế nữa.
The OEM Bleeder Bolt is always going to Rust and Decay, so this Material:It is safer to replace it with Stainless Steel.Be sure to bleed the air and refill the fluid in the MASTER after replacement.Th...Đọc thêm - Phù hợp:
- HONDA XL400VTRANSALP 92 ND06 [Frame No.]ND06-1000001 or later [Use part]Caliper side
- HONDA ST1100ST1100 PAN EUROPEAN 00 [part used] Caliper side
- HONDA X4 97-00 SC38 [part used]Caliper side
- HONDA X4 97 SC38 [Frame No.]SC38-1000001 or later [Use part]Caliper side
- HONDA XL400VTRANSALP 91 ND06 [Frame No.]ND06-1000001 or later [Use part]Caliper side
- ...và hơn thế nữa.
ZrX1200 DAEG OEMHydraulic Clutch Bleeder Bolt This Material:I replaced it with a Stainless Steel one. The OEM Bleeder Bolt is made of steel and will always rust over time, so it's best to replace it. ...Đọc thêm - Phù hợp:
- HONDA NS-1 -99
- HONDA NSR80 -99
- HONDA NSR50 -99
The installation itself is very easy, but there is one place where it is difficult to fasten the Tie Wrap depending on the oil tank, so you need to be creative.Texture-wise, it was more PelePera than ...Đọc thêm - Phù hợp:
- HONDA X4 TypeLD 97-01 (SC38)[Place of use]Front[Required quantity]2
- HONDA X4 TypeLD 97-01 (SC38)[Place of use]Rear[Required number]1
- HONDA XLR250R 91-94 (MD22)[Place of use]Rear[Required number]1
- HONDA CBR250R 88-89 (MC19)[Where used]Front[Required number]1
- HONDA VFR400R 87 (NC21)[Place of use]Front[Required number] 4
- ...và hơn thế nữa.
Used for KLX125Compared to the OEM, the screw mountain part looked smaller, but I was able to install it without any problems.It's just the right length without the excess length that other people hav...Đọc thêm - Phù hợp:
- SUZUKI SKYWAVE400 burgman 07-16 *CK44A/CK45A [Where used]Front right side
- SUZUKI SKYWAVE250 burgman 07-12 *CJ44A/CJ45A/CJ46A [part used]Front
- SUZUKI SKYWAVE250 burgman SS 07-12 *CJ44A/CJ45A/CJ46A [part used]Front
- SUZUKI SKYWAVE250 burgman Type S 07-12 *CJ44A/CJ45A/CJ46A [part used]Front
- SUZUKI SKYWAVE250 burgman TypeM 07-12 *CJ44A/CJ45A/CJ46A [part used]Front
- ...và hơn thế nữa.
Product NameDAYTONA DAYTONA Red Pad Brake PadsItem Number79814VehiclesDREAM110 (Wave foot diversion + RCBCaliper)Number of man-hoursAbout 30 minutesWhy did you choose this product?Because Brake Pads o...Đọc thêm - Phù hợp:
- HONDA X4 TypeLD 97-01 (SC38)[Place of use]Front[Required quantity]2
- HONDA X4 TypeLD 97-01 (SC38)[Place of use]Rear[Required number]1
- HONDA XLR250R 91-94 (MD22)[Place of use]Rear[Required number]1
- HONDA CBR250R 88-89 (MC19)[Where used]Front[Required number]1
- HONDA VFR400R 87 (NC21)[Place of use]Front[Required number] 4
- ...và hơn thế nữa.
It's just to keep it from rusting and to see if it will move better. The quality is good, so there is no problem.Đọc thêm
CỬA HÀNG LỚN NHẤT
TẠI NHẬT BẢN
COUPON ĐẶC BIỆT,
GIẢM GIÁ, KHUYẾN MÃI
DỊCH VỤ GIAO HÀNG
NHANH, MIỄN PHÍ