- Phù hợp:
- SUZUKI ST250 -07 NJ4AA Carburetor *switch hole drilling required|*Side caps can be used for stock.
- SUZUKI ST250 E Type -07 NJ4AA *Processing of switch holes required|* Normal side caps can be used.
- SUZUKI RV200 VANVAN -07 NH41A Carburetor *Processing to open switch holes required|* The stock side caps can be used.
- KAWASAKI BALIUS2 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- HONDA FTR223 (without side numbers) * Requires modification of the clutch cable and choke cable.
- ...và hơn thế nữa.
Timing was not available for Tommaselli, so I bought it in timeThe looks and Position are great, but … it won't pass inspection. wĐọc thêm - Phù hợp:
- YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required
- YAMAHA TW200E 00- (Disc Brake Car) *Processing of switch hole is required
- YAMAHA TW200E -99 (drum brakes)
- YAMAHA TW200 -99 (drum brakes)
- Others Universal
- ...và hơn thế nữa.
It was not suitable for me, although it is a part that cannot be helped because it is something that cannot be understood until it is put on.The atmosphere is that of a family car.I thought it was too...Đọc thêm - Phù hợp:
- KAWASAKI ZRX400 -04
- KAWASAKI ZrX1200ZrX1200 DAEG
- KAWASAKI ZRX1200R
- KAWASAKI ZRX1100II
- KAWASAKI ZRX1100
- ...và hơn thế nữa.
As always the package reached on time. Tool is very light and serves it purpose. Quality and craft of tool is great and will stand for a long period of time. Great product and recommended to have.Đọc thêm - Phù hợp:
- SUZUKI GSR400 -12 *Ask to drill switch holes|* Normal side caps can be used.
- KAWASAKI BALIUS2 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- KAWASAKI ZEPHYR750 RS *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- KAWASAKI ZEPHYRX *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- KAWASAKI ZEPHYR750 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- ...và hơn thế nữa.
[How is it used?I changed XJR400R from OEM Handlebar to this Condor Handle.Was the one you received as per Image?The precision of the construction is good and the shape is cool.Was the installation di...Đọc thêm - Phù hợp:
- Others Universal
- SUZUKI GRASS TRACKER Big Boy 09-12 (FI car)*You can use stock side caps.
- SUZUKI GRASS TRACKER Big Boy -08-8(Carburetor)*Drilling of switch hole is required|*You can use stock side cap. |*It is necessary to change the direction of the throttle cable
- clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo.
- SUZUKI GRASS TRACKER 09-12 (FI car)*You can use stock side caps.
- ...và hơn thế nữa.
Not a lot you can say about handlebars. They look good and seem to be of a high quality, time will tell. However there are a few points worth mentioning. There is a manufacturers sticker where the gri...Đọc thêm - Phù hợp:
- SUZUKI GSR400 -12 *Ask to drill switch holes|* Normal side caps can be used.
- KAWASAKI BALIUS2 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- KAWASAKI ZEPHYR750 RS *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- KAWASAKI ZEPHYRX *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- KAWASAKI ZEPHYR750 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- ...và hơn thế nữa.
Separate Handlebars were out of stock, so I put the Condor Handle on backwards and tilted it forward. It is very forward leaning and narrow, so I think it will be strange to use Large until I get used...Đọc thêm - Phù hợp:
- Others Universal
- SUZUKI GRASS TRACKER Big Boy 09-12 (FI car)*You can use stock side caps.
- SUZUKI GRASS TRACKER Big Boy -08-8(Carburetor)*Drilling of switch hole is required|*You can use stock side cap. |*It is necessary to change the direction of the throttle cable
- clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo.
- SUZUKI GRASS TRACKER 09-12 (FI car)*You can use stock side caps.
- ...và hơn thế nữa.
I replaced Handlebar to immeChain.The height of the handlebar is now much lower.It's so much easier to ride.Đọc thêm - Phù hợp:
- YAMAHA XJR400R 01-07 RH02J *Processing to open switch hole required|*Side cap required (for 18mm diameter)
- YAMAHA XJR1300 07-12 (RP17J) *Processing to open switch hole required|* Required side cap (for 18mm ID)
- YAMAHA XJR1300 00-06 (RP03J) *Processing to open switch hole required|*Side cap required (for 18mm ID)
- YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required
- YAMAHA TW200E 00- (Disc Brake Car) *Processing of switch hole is required
- ...và hơn thế nữa.
I put it on my st250, but the OEM handlebar made me look awkward when riding.The quality is not luxurious, but it feels solid!Đọc thêm - Phù hợp:
- HONDA FTR223 (without side numbers) * Requires modification of the clutch cable and choke cable.
- HONDA CB750 04- RC42 *Processing of switch hole required|* Required side cap (for 18mm ID)
- HONDA CB400SF 99-07 NC39 VTEC *Processing of the switch hole is required|* Required side cap (for 18mm ID)
- HONDA CB400SUPER BOLDOR 05-07 NC39 *Processing of switch hole required|* Required side cap (for 18mm diameter)
- HONDA CB400SF 99-07 NC39 VTEC III* requires drilling of switch hole|* requires side cap (for 18mm ID)
- ...và hơn thế nữa.
This is a change from Plating of the same type.On the LeftGrip side, there is a paper seal with the product number, ManufacturerMain and product name, which is still difficult to remove.If you could m...Đọc thêm - Phù hợp:
- YAMAHA TW225E 00- (Disc brake models) *Processing of switch hole is required|*It is necessary to change the throttle cable
- clutch cable and brake hose.
- YAMAHA TW200E 00- (Disc brake models) *Processing of switch hole is required|*It is necessary to change the throttle cable
- clutch cable and brake hose.
- YAMAHA TW200E -99 (Drum brake models) *Changing the throttle cable
- ...và hơn thế nữa.
I chose this for the Handlebar of my YamahaTW200E 2JL.Compared to the OEM, it makes it easier to lean forward slightly and tighten the elbows.When I tried to lower my head and tighten my elbows to red...Đọc thêm - Phù hợp:
- KAWASAKI 250TR 02-13 BJ250F
- HONDA APE 50 01-16 AC16
- HONDA APE 100 TypeD 02-16 (HC13)
- HONDA APE 100 TypeD 02-16 (HC07)
- HONDA APE 100 02-16 HC13
- ...và hơn thế nữa.
I bought it because of the replacement of headlight STAY.
I bought it because I wanted to use a genuine winker.
It fits well without any problems and it's good that the look I wanted came out the wa...Đọc thêm - Phù hợp:
- HONDA MONKEY BAJA 91-01
- HONDA MONKEY 78-16 Z50J 1300017-|AB27
- HONDA MAGNA50 95-07 AC13
- HONDA DREAM50 97-00 AC15
- HONDA JAZZ 86-99 (AC09)
- ...và hơn thế nữa.
It had a cheap Plating pure STD Nut on it, but the Rust was bad for its age, so I replaced it.After all, Aftermarket parts, Beauty Red looks great!It is Match for White/Red Coloring.Đọc thêm - Phù hợp:
- KAWASAKI 250TR 02-13 BJ250F
- HONDA APE 50 01-16 AC16
- HONDA APE 100 TypeD 02-16 (HC13)
- HONDA APE 100 TypeD 02-16 (HC07)
- HONDA APE 100 02-16 HC13
- ...và hơn thế nữa.
[How is it used?I removed the OEM Meter Bracket from my 250TR and needed to relocate the Blinker, so I bought one.Was the one you received as per Image?It's Bracket, so I don't have that many requests...Đọc thêm - Phù hợp:
- YAMAHA TW225E 00- (Disc brake models) *Processing of switch hole is required|*It is necessary to change the throttle cable
- clutch cable and brake hose.
- YAMAHA TW200E 00- (Disc brake models) *Processing of switch hole is required|*It is necessary to change the throttle cable
- clutch cable and brake hose.
- YAMAHA TW200E -99 (Drum brake models) *Changing the throttle cable
- ...và hơn thế nữa.
Used for APE 100Installed on Direct.comTop BridgeI hesitated with Type 1, but I decided to use Type 0 which is the closest to Straight!There is a Mini type in the type 1, and I was lost, but I think t...Đọc thêm - Phù hợp:
- KAWASAKI ZEPHYRX *Required switch hole drilling process|*Required side cap (for inner diameter φ18mm)
- KAWASAKI ZEPHYR400 *Required switch hole drilling process|*Required side cap (for inner diameter φ18mm)
- HONDA NC700S 12 (Excluding ABS and DCT models)*Processing of switch hole drilling required|*Side cap required (for inner diameter φ18mm)
- YAMAHA XJR400R 01-07 (RH02J)*Processing of switch hole drilling required|*Side cap (for inner diameter φ18mm)|*Please install the bar end upward.
- YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required
- ...và hơn thế nữa.
[How is it used?I wanted to replace the Grip and Bar End while I was doing the Lever replacement, so I replaced the Handlebar too!Was the one you received as per Image?While slightly lower than OEM, n...Đọc thêm - Phù hợp:
- YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required
- YAMAHA TW200E 00- (Disc Brake Car) *Processing of switch hole is required
- YAMAHA TW200E -99 (drum brakes)
- YAMAHA TW200 -99 (drum brakes)
- Others Universal
- ...và hơn thế nữa.
[How is it used?The width of the OEM Handlebar of 250TR was too wide and it was difficult to ride, so I replaced it with this product.Was the one you received as per Image?It was an inexpensive produc...Đọc thêm - Phù hợp:
- YAMAHA XJR400R 01-07 RH02J *Processing to open switch hole required|*Side cap required (for 18mm diameter)
- YAMAHA XJR1300 07-12 (RP17J) *Processing to open switch hole required|* Required side cap (for 18mm ID)
- YAMAHA XJR1300 00-06 (RP03J) *Processing to open switch hole required|*Side cap required (for 18mm ID)
- YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required
- YAMAHA TW200E 00- (Disc Brake Car) *Processing of switch hole is required
- ...và hơn thế nữa.
Replaced the Handlebar width to make it narrower for the VANVAN200 Custom.The Image is approximately half a fist inside and one handful down from OEM.As a result, it is easy to slip through and I am g...Đọc thêm - Phù hợp:
- KAWASAKI ZRX400II *Requires drilling of switch hole|*Applicable side cap (for 18mm dia.)|*Cannot be installed on models 05 and later due to interference with the cowl.
- KAWASAKI W400 *Required Switch Hole Drilled
- KAWASAKI ZRX400 -04 *Processing to drill switch holes is required|* Required side cap (for 18mm I.D.)|*Not available for the models after 05 due to interference with the cowl.
- HONDA MONKEY 84-07 (Z50J-1600008-|AB27-1000001-1899999)*With Top Bridge H30 Holder or MONKEY Handle Holder required
- HONDA HORNET250 *Need to drill switch hole
- ...và hơn thế nữa.
I reverse engineered it on my XJR1300.I was not satisfied with the position and appearance of the Tommaselli separate handlebar I had previously installed, so I changed to a Pipe Handlebar.This was th...Đọc thêm - Phù hợp:
- SUZUKI GRASS TRACKER Big Boy 09-12 (FI car)*You can use stock side caps.
- YAMAHA XJR1300 07-12 (RP17J) *Processing to open switch hole required|* Required side cap (for 18mm ID)
- YAMAHA XJR1300 00-06 (RP03J) *Processing to open switch hole required|*Side cap required (for 18mm ID)
- YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required
- YAMAHA TW200E 00- (Disc Brake Car) *Processing of switch hole is required
- ...và hơn thế nữa.
So far, I had installed an ez-fit bar for the zrx1200r, which I happened to find on sale cheap, because I wanted to make the Handlebar black. This bar was a replacement for the Hardy Load Bar medium, ...Đọc thêm - Phù hợp:
- KAWASAKI ZRX400 -04
- KAWASAKI ZrX1200ZrX1200 DAEG
- KAWASAKI ZRX1200R
- KAWASAKI ZRX1100II
- KAWASAKI ZRX1100
- ...và hơn thế nữa.
When I tried to make a hole without using Hole Guide before, I couldn't make a hole well, but I can make a hole well by using this Hole Guard.Đọc thêm
CỬA HÀNG LỚN NHẤT
TẠI NHẬT BẢN
COUPON ĐẶC BIỆT,
GIẢM GIÁ, KHUYẾN MÃI
DỊCH VỤ GIAO HÀNG
NHANH, MIỄN PHÍ