PMC (Performance Motorcycle Creative) sản xuất các bộ phận cần thiết để phục hồi cho dòng xe KAWASAKI Z & Triple. Họ cũng sản xuất lại các bộ phận, các sản phẩm đã ngừng sản xuất của nhiều dòng xe máy cổ điển và hàng OEM (hàng zin) như đèn báo rẽ và đèn báo rẽ tùy chỉnh.
 |  |  |
| | | |
 |  |  |
| | | |
 |  |  |
| | | |
Looks nice in the photos, but this PMC seat came with creases in it, and is lower than the standard seat. There are TWO oother big issues with it - the belt I got does not fit, and has a sharp 'nut an...
색도 순정과 비슷해 진짜 만족합니다. 하지만 한가지 불만족인 부분은 토크값이 높아서 힘이 없으면 하기 힘들것이라는 것입니다.
----------------------------------------------------------
The colors are similar to pure, so I am really satisfied. However, ...
There is no operating noise. It is Relay that chooses the body of the vehicle.
If you read the description, you will understand unless you are too stupid to understand.
Replaced at the same time as the Meter Overhaul.After all, a new one is soft and good
There is no snagging, etc., and it works normally.I think that the quality of the bearing depends on the degree of low wear. I think it can be used without any problem as long as it rotates well and d...
Used during engine overhaulI did a lot of research and PMC is the cheapest? Maybe.The feel is not bad and I recommend it.
I exchanged it with Release, which was tired, but I didn't feel any change of lightening, only that Clutch became harder to cut and I felt lighter.I'm sure a certain Germany Release will be lighter.It...
Replaced during Restore.It is lighter and cleaner than the tired Cable, but not the immensely Large effect, of course. wNo complaints as an item.Can be used without Trouble
I didn't notice any particular effect with Timing, which I replaced and test ran.In the long run, it's probably a good idea to replace it. I feel like it's a good idea to replace it in the long run.
 | ||
| |
The price is not cheap, but it is quite easy and nice to be able to do it easily to Helmet lock.It doesn't look too bad, although the extra Key is a hindrance.
I bought this last time and the texture is very good.
I replaced the OEM Helmet holder because it was difficult to use.The Plating matches the Handlebar very well and makes it very easy to lock the Helmet when leaving the Motorcycle.It was the right purc...
I help my friend to buy it. It seems as universal for most of the motorbike. My friend use it on YS250 and fit for it. The texture of this lock is hard. Seems not to bad. My friend use it very success...
I helped my friend to bought it. I am using the Japan brand kitaco but however that is not fit to my friend motorbike, so I bought this because it is universal one. It is made in Taiwan, so I think it...
Since the Helmet lock of the KSR which I am on now is in a place where it is very hard to use, I bought this Universal Product here.Although I was satisfied with the functional aspect, it was better n...
Thank you for supplying finer parts of old car.Although it may be Refreshing if it does not have an appearance, I think that it is a handy part if there is.The shape is also faithful? Do not touch the...
Large size did not fit a little with CB 400 SB, but if you tighten it tightly you will not loosen and you can set the mounting position freely and Helmet lock is easy.
Busy at VERSYS of Kawasaki.Helium hook attached to the car from the beginning must bother to use Seat unless it is inconvenient because it can not be used,I had this installed before car delivery.When...
PCX does not have Combination Nifrek. Seat is also narrow. I use it for Combination Nifrek for a bit of shopping. I installed it in HandlebarCenter, but it was mounted only diagonally. But as Combinat...
 |  |  |
| | | |
 | ||
| |
I bought this because the NORMAL MountHook is made of steel and is easy to rust and doesn't look good. The appearance and the texture are good, and I am satisfied. I feel that it is a little expensive...
These simple custom parts are inconspicuous, but they make you feel different from others by installing them. It is easy to install because you only have to replace it with NORMAL parts.
What made you decide to buy?NORMAL was not so coolHow was your experience with it?The feeling of use is no different from NORMALWas it difficult to install?It's easy to replace with NORMAL, so anyone ...
OEMHookMount is made of iron Simple It's too simple and it does not seem like it's sexy.PMC's Rear suspensionMountHook emphasizes Design property there, Hook part Aluminum, Screw part enha...
OEM's Rear Suspension Mount Hook was a long time feeling on my own.This PMC's Rear Suspension Mount Hook is short and made sharp and Silhouette is satisfied with Refreshing.I chose Black for M...
Surface preparation is very beautiful. When it attaches to vehicles, compared with a pure black resin Funnel, it is conspicuous in a good meaning, and is a smart Parts.
Processing accuracy is also ...
 |  |  |
| | | |
 |  |  |
| | | |
 |  | |
| | |
It was a product as I thought. There is no problem with installation and texture is perfect.Cospa is satisfied well also in terms of price.Image when I installed it on the car body just like I was sat...
Because the Overflow Hose Clamp currently installed is deteriorating, I was looking for OEM Product's Overflow Hose Clamp, but it was out of print and purchased PMC made.The texture of the product...
Refresh according to Harness exchange of Z750FX3 !!We processed Wiring and moved it under the Battery case at the position where Regulator was located in OEM.I pray for a long time.
Since the relay of the cell broke down, it exchanged for here instead of an original manufacturer's product. A result does not change mostly that it is pure, although it can use ordinarily. It is only...
Để tiếp tục xem sản phẩm này trên trang Webike nội địa, vui lòng chọn "Truy cập Webike nội địa Nhật".
?
* Cửa hàng TỐT NHẤT và DUY NHẤT để có thể tìm kiếm hàng chính hãng Nhật Bản.
* Đăng ký ngay bây giờ để nhận ưu đãi bất ngờ và những quà tặng đặc biệt khác!
* Hơn 800,000 sản phẩm. KHÔNG khó để tìm kiếm phụ tùng mà bạn muốn.
Chúc mừng bạn! Tài khoản mới của bạn đã được tạo!
Bây giờ với những đặc quyền của thành viên, bạn có thể tích lũy được thêm nhiều kinh nghiệm mua sắm trực tuyến với chúng tôi.
Nếu bạn có BẤT KỲ câu hỏi về hoạt động của cửa hàng trực tuyến này, vui lòng gửi mail đến Webike thông qua phần Liên hệ với chúng tôi.
Một email xác nhận sẽ được gửi đến địa chỉ email mà bạn đã cung cấp. Trong vòng 1 tiếng đồng hồ, nếu bạn vẫn chưa nhận được email thì vui lòng liên hệ với chúng tôi.
Về dịch vụ "Góc Webiker" của chúng tôi 
CỬA HÀNG LỚN NHẤT
TẠI NHẬT BẢN
COUPON ĐẶC BIỆT,
GIẢM GIÁ, KHUYẾN MÃI
DỊCH VỤ GIAO HÀNG
NHANH, MIỄN PHÍ