Racing bánh xe của TGR TECHNIX GEAR "mà triệt để theo đuổi độ cứng và đường truyền bề mặt. Trong khi thưởng thức cưỡi trong khi tay đua có thể nhận ra hiệu suất của máy để hạn chế, trong khi đạt được độ cứng cao, giảm cân triệt để thực hiện.
 |  |  |
| | | |
 | ||
| |
I replaced it with a soft spring while overhaul at Technique's.Because of his light weight, he had a bouncing feeling with the OEM, but this one has become firm and sticky.As I mentioned in the Front ...
I had a hard time with the OEM ones due to my light weight, but after replacing the OEM ones, I was able to bottom out properly.It doesn't bottom out, but it seems to stick properly.I felt it was a fi...
Changed Spring along with Front forkOH.With the OEM, the nose drive was very bad and I had a lot of hiccups when braking quickly.I was able to run the OffRoad course with less bottoming out and less s...
I replaced the spring as well as the oil in the front fork. Since it was only one side, the work itself might be easy, but I asked the DREAM store to do it for me. I'm not dissatisfied with NORMAL, bu...
I have been wanting to change the front and rear springs of my WR250R to softer ones for a long time, so I decided to purchase and replace them myself. if it is just the springs, I can easily replace ...
The OEM suspension was overloaded and crushed, so I released it to Yahoo and bought this product.It is fluffy and comfortable, unlike the buzzing and sinking feeling before the replacement.
[How is it used?It also serves as Refresh of the suspension of SEROW250 that had been overused in the mountain play.Was the one you received as per Image?Hard spring was used by a fellow mountain enth...
If you change the suspension from Normal suspension, the ride becomes more like Racer.But it doesn't make it harder to ride on the street, it's just more shaddrill overall. There is no negative feelin...
I felt that the Normal suspension was too large in terms of sinking when breaking and cutting the handlebar when cornering, so I replaced it with the standard SEROW Technics Fork Spring.My impression ...
[How is it used?Used in Off-roadMain of forest road, Trekking, EDCourseetc.Was the one you received as per Image?I wasn't worried originally because it's a Technics product, but there's nothing to com...
 |  |  |
| | | |
I used it on a GSX-S1000 FFork.It may be too thick to fit in some other cars.I was able to use it on GSX-S1000 FFork for now.It would be easier to work with if it were a little thinner, but it would p...
I used to use a homemade SST.It was an extremely dangerous job.It was dangerous and time consuming.I thought it would be expensive, but I bought it.If used in conjunction with Impact, the objective is...
This would be a super time saver!I'm sure it's useless to Sun Machine, who feels his time is free.If this Compressor has Impact, you'll be done in no time!If you use it for O/H along with the red stic...
Red and Cool (Lol)I've been using a burr wire for a while now, and it's just so much more convenient to put it back in. (Lol)Screw diameter is also 4Pattern, but it should not be used!Do you use OHLIN...
BALI is BALIBALI, but I don't care about tools because ingenuity is a large thing.All you have to do is file aOther people wrote that Size doesn't fit, but I don't care because I just need to cut it d...
It is a hard Plastic WrenchThe color is also very nice, like a special tool.In fact, even if you don't have it, there are alternatives, but a special tool is still a great motivator!The atmosphere wil...
I was looking for a plastic tool because my opponent is AluminumIt's a little heavier than I imagined.I'm happy to use plastic without giving the other side Damage!
I bought this product for Front fork oil level adjustment of CB250R.There is a little rattling, but it can be used without a problem.It is convenient to use Torque wrench.
[How is it used?I used it for pre-road adjustment of CBR1000RR-R SP.Even though the suspension is electronically controlled, the pre-road adjustment is an analog manual adjustment.Suspension This is a...
I bought this to loosen the top cap on my Showa Fork. It was easy to use and perfect for loosening the delicate top cap.Material:I was worried about the durability before I used it because it is made ...
Để tiếp tục xem sản phẩm này trên trang Webike nội địa, vui lòng chọn "Truy cập Webike nội địa Nhật".
?
* Cửa hàng TỐT NHẤT và DUY NHẤT để có thể tìm kiếm hàng chính hãng Nhật Bản.
* Đăng ký ngay bây giờ để nhận ưu đãi bất ngờ và những quà tặng đặc biệt khác!
* Hơn 800,000 sản phẩm. KHÔNG khó để tìm kiếm phụ tùng mà bạn muốn.
Chúc mừng bạn! Tài khoản mới của bạn đã được tạo!
Bây giờ với những đặc quyền của thành viên, bạn có thể tích lũy được thêm nhiều kinh nghiệm mua sắm trực tuyến với chúng tôi.
Nếu bạn có BẤT KỲ câu hỏi về hoạt động của cửa hàng trực tuyến này, vui lòng gửi mail đến Webike thông qua phần Liên hệ với chúng tôi.
Một email xác nhận sẽ được gửi đến địa chỉ email mà bạn đã cung cấp. Trong vòng 1 tiếng đồng hồ, nếu bạn vẫn chưa nhận được email thì vui lòng liên hệ với chúng tôi.
Về dịch vụ "Góc Webiker" của chúng tôi 
CỬA HÀNG LỚN NHẤT
TẠI NHẬT BẢN
COUPON ĐẶC BIỆT,
GIẢM GIÁ, KHUYẾN MÃI
DỊCH VỤ GIAO HÀNG
NHANH, MIỄN PHÍ