- In my opinion, it is a necessity for vehicles with external big cabs, but not for normal cabs.We are using it in Lectron, but Bore up & Big cab Quantities:I feel the need for the first time in Set.It ...Đọc thêm
- Phù hợp:
- KAWASAKI 750SS MACHIV H2 We recommend the use of the PINGEL 8000 series.
- KAWASAKI 750SS MACHIV H2 [Mach]. Recommended to use Pingel 8000 series
Required when attaching PinGelCookWe used it for MACH.Use less-used water tapes for installationBuy at Home center.Đọc thêm - Phù hợp:
- KAWASAKI Z1-R Recommended to use the PINGEL 6000 series
- KAWASAKI Z1-R Recommended to use the PINGEL 6000 series
- KAWASAKI Z1 Recommended to use the PINGEL 6000 series
- KAWASAKI Z1000 (air-cooled | KZ) (A1) Use of the PINGEL 6000 series is recommended.
- KAWASAKI Z1100 GP B2 Recommended to use the PINGEL 6000 series
- ...và hơn thế nữa.
PinGelCook and NaturallyQuantity:I bought this in a set. At first, I was worried about getting the right angle because it was screwed in, or if it would leak. I'm glad I bought it.Đọc thêm - I installed this carburetor when I switched to TMR. it has reserve, no lack of flow, and no leaks even after several years of use. If you are replacing a 6mm hose carburetor with an 8mm hose external ...Đọc thêm
- Adapter and Quantity:I bought it in a Set, but Parenthesis got better.Đọc thêm
- PinGel's Fuel Cock and Quantity:I bought it in a Set, but it was a fast response, and Motorcycle became Parenthesis well.Đọc thêm
- When I changed the Carburetor, I replaced the negative pressure type Fuel Cock with a direct type PinGel.Because the screw part is aluminum, if it tightens too much, the screw mountain is destroyed an...Đọc thêm
- I bought this when I changed my Carburetor to TMR-MJN and when I changed my Fuel Cock from negative pressure type to direct pressure type.Đọc thêm
- This is a must when PinGel Cook is installed. It is made of a moderately thick Gasket, so as long as the bottom of the Tank is not rough or distorted by Rust, there should be no leakage of Gasoline.If...Đọc thêm
- It was easy to install. I thought it was expensive, but the texture is very nice and cool.Just in a few days, Plating got Rust cloudy. It's also very easy to operate.Đọc thêm
- I used it for PinGelCook installation. The texture accuracy is very good.It's easy to install and can be done by anyone, and it's the perfect companion for your fcr.Đọc thêm
- I've had a Chrome PinGel on my Motorcycle since I bought it usedSince it's an older car, the OEM Product may have been discontinued and put on as a replacementAbout two months ago, I had to replace th...Đọc thêm
- I used it to divert the tank of DRZ400 to DR250R of SEA BASSI managed to avoid the interference with the Frame and Engine hanger on the back of the tank by beating it I did, but there was nothing I co...Đọc thêm
- Due to insufficient gasoline flow from Cook and interference with the Carburetor, it was unavoidable I can't blame you if you want to replace Cook, but right now I personally don't think it's very des...Đọc thêm
- Phù hợp:
- KAWASAKI GPZ750R NINJA Recommended to use the PINGEL 6000 series
- KAWASAKI GPZ750R NINJA Recommended to use the PINGEL 6000 series
- KAWASAKI GPZ900R NINJA Recommended to use the PINGEL 6000 series
- KAWASAKI GPZ900R NINJA Recommended to use the PINGEL 6000 series
- KAWASAKI Z1000 (air-cooled | KZ) (A2) PINGEL 6000 series are recommended
- ...và hơn thế nữa.
It's a Birdie, but I use it to mount the Powko Cook from FOR HARLEYIt is also possible to use a different Offset to interfere with the Carburetor and Cook It is also beneficial for avoidanceThe Tap is...Đọc thêm - I'm not happy with the pictures on the product pageThe picture on the product page is of Quantity:1pc. only, Quantity:2pc. SetWasher is in the picture But the number of injections is 1pcFrom the persp...Đọc thêm
- We have a PinGelCook-equipped vehicle and expect it to look and function like a PinGelCookPurchasedIt was good for the look and handling of the Fuel Hose, but I installed it and tried it out, but it w...Đọc thêm
- Switching of the original Cook became frustrating, so I exchanged it with a good reputable PinGel.The vehicle is ZEPHYR 750.For the installation please see the diary.I exchanged it and tried running, ...Đọc thêm
- A very good quality.
Complete set - adapter, bolts, gaskets
approached the Yamaha XS 850 tank.
Used together with petcock 1/4 NTP
twisted well - no need to use glue for additional sealing
cutting...Đọc thêm - I installed it in Kawasaki 350 SS.Since I had leaked the outside Cook that I had used before for 2 years, I avoided the same thing and made it to PinGel.Installation is easy on the Tank side (Adapter ...Đọc thêm
CỬA HÀNG LỚN NHẤT
TẠI NHẬT BẢN
COUPON ĐẶC BIỆT,
GIẢM GIÁ, KHUYẾN MÃI
DỊCH VỤ GIAO HÀNG
NHANH, MIỄN PHÍ