- Phù hợp:
- SUZUKI RM-Z450 10-17
- SUZUKI RM250 07-08
- SUZUKI RM125 06-08
- SUZUKI RM-Z450 05-21
- SUZUKI RM-Z250 07-15
- ...và hơn thế nữa.
Each job needs the correct tool to work on motorcycle, this tool made it easy, plus there was no damage to the aluminum nut. Be aware that these may not fit on the fork cap when in the triple clamp, s...Đọc thêm - I have dirtbikes and all the forks are different sizes. Finally bought this tool and now I can have one tool for many applications. I have used it twice and worked great. Stores in a small box and cle...Đọc thêm
- outer fork tube clamp has a threaded lever on the side of the clamp that closes its jaws tightly on the fork. You can even remove the threaded lever from the outer fork tube clamp, so that the fork tu...Đọc thêm
- my only critic would be that the writing for me was small and had to really focus to gauge my levels.
Another one of those tools you don't really need but makes the job of adjusting fork oil levels a ...Đọc thêm - Wire LouverBởi DRCAbout quality and texture
Данный инструмент полностью выполнен на чпу станке из цельного куска алюминия и состоит из четырех частей, прижимная пластина и сам корпус, также резиновая манжета и затягива...Đọc thêm - Phù hợp:
- SUZUKI RM-Z450 10-17
- SUZUKI RM250 07-08
- SUZUKI RM125 06-08
- SUZUKI RM-Z450 05-21
- SUZUKI RM-Z250 07-15
- ...và hơn thế nữa.
This fork cap wrench is good, light, compact & strong. It comes with english instruction. So now i can work with ease & piece of mind to replace newly bought outer tube and aftermarket spring.Đọc thêm - Phù hợp:
- SUZUKI RM-Z450 10-17
- SUZUKI RM250 07-08
- SUZUKI RM125 06-08
- SUZUKI RM-Z450 05-21
- SUZUKI RM-Z250 07-15
- ...và hơn thế nữa.
This is a must if you plan to replace your own fork seals on shows shocks. Well made and does the job. Loosen the caps before you remove the forks from the bike.it is very light and cosmetically appea...Đọc thêm - As advertised, it makes it easy to use alone. There are no measurement markings on this tool, you'll have to measure on your own
The instructions are a little lacking but the video posted online clear...Đọc thêm - finishing is good. But unfortunatly its broken when i tried to tighten the stemnut. So i was unable to use it too much time. Not a strong item to use in more hard works.Đọc thêm
- The good thing is that the price is low. It could also be used on the Steering stem of the NSR250R. It is not easy to hook, but it is not a part to be tightened strongly, so it can be used.Đọc thêm
- There are several different sizes, so I don't think there is a Fork that doesn't fit.It is not difficult to use and work with.As a product, I have no complaints at all.I think the price is right.Đọc thêm
- I am replacing my rear suspension with Other Brand Product so I bought this to go with it.If you don't find the right sag for you, there is no point in replacing the rear suspension.It is Setting of D...Đọc thêm
- I bought it because it is a pipette format not Syringe and I thought it would be easier to work with one hand. However, I could not use it.Because the length of the Pipe part is not 200mm, it did not ...Đọc thêm
- Ninja 250 I used this product at Front forkOH in 2014. This is my first OH and it was easy to use and the process went smoothly.RecommendedĐọc thêm
- There are 4 sizes with curve tip and flat tip..it functions as it should. Built quality is average because the paint peel off after usage.Đọc thêm
- If the brush of the chain brush is damaged, only the brush part can be replaced, so it is Reasonable. If it were a little cheaper, there would be nothing to say, but it is a grateful product. It is co...Đọc thêm
- Used for OH of Ninja 250 Front fork. It was my first OH and it worked well!Đọc thêm
- Phù hợp:
- SHERCO 500SCF FACTORY 19-20
- SHERCO 450SCF FACTORY 19-20
- SHERCO 300SCF FACTORY 19-20
- SHERCO 250SCF FACTORY 19-20
- SHERCO 300SC FACTORY 19-20
- ...và hơn thế nữa.
This is really useful. There's nothing you can't do without it, but if you have it, you can complete the task quickly.The structure of the inside of the cup which doesn't scatter Oil around like a wat...Đọc thêm - I used it to Grease up the Stem bearing on my KLX230R.The size is perfect. Accuracy is also not a problem at all. When I saw the product, I thought that it was a little too small, but since Stem beari...Đọc thêm
- I bought this for ForkOH.It was a little difficult to suck out the hard oil, but the work itself was very easy!Maybe it's for softer Oil.Đọc thêm
CỬA HÀNG LỚN NHẤT
TẠI NHẬT BẢN
COUPON ĐẶC BIỆT,
GIẢM GIÁ, KHUYẾN MÃI
DỊCH VỤ GIAO HÀNG
NHANH, MIỄN PHÍ