- Phù hợp:
- HONDA MONKEY
Quality and texture information is no different from the std product
It is compatible with Honda Std products for its usability
You should have a wire stripper to buy together
It's easy to instal...Đọc thêm - Phù hợp:
- HONDA GORILLA
- HONDA MONKEY
- HONDA APE50
- HONDA NS50F
- HONDA CHALY
- ...và hơn thế nữa.
About quality and texture The quality of Minimoto is really good
About the feeling of use I feel really good because the color got brighter
Products to buy together If necessary, a relay to match t...Đọc thêm - [How is it used?I have been using Bullet Terminal for all of my Harness tweaking. Sometimes, when I have the motivation, I use AutoBacks and Color:I used to go to YellowHat to buy Coupler sets made by...Đọc thêm
- Phù hợp:
- HONDA MONKEY
- HONDA GORILLA
I removed the Lens when replacing the bulb and it was the same as the OEM, screwed in and easy to remove. The product itself is also beautiful.Just! The crimp on the terminal was weak and it came off ...Đọc thêm - Phù hợp:
- HONDA SUPER CUB C50-N
The speedometer did not perform well for the increase in engine power, so I suspected that the cable of the speedometer was cracked and had to replace it.It is indeed 20 years old, so it is not unreas...Đọc thêm - Phù hợp:
- HONDA MONKEY 6V
- HONDA DAX 6V
The product was initially defective, but cannot be returned or exchanged.Attention!If the product is installed in a car model other than the compatible car model, it will not be returned or exchanged ...Đọc thêm - Phù hợp:
- HONDA MONKEY 6V
- HONDA DAX 6V
This product is not a Universal Product and is for Honda's 6VDAX and MONKEY only.If the product is installed on a model other than the compatible model, even if it is initially defective, it will not ...Đọc thêm - Phù hợp:
- HONDA MONKEY 4L
4LMONKEYHeadlight's Spring for fixing the Meter.Since the spring has a rather special shape and the mounting place is Tight, it is safer to buy a dedicated spring than to make one by yourself. I waste...Đọc thêm - The NC750X has many areas of reduction in cost.The clutch wire cable (let's make it hydraulic!) Dust Boots are also not included.Both the Lever and Mission sides are bare.The Lever side is made from O...Đọc thêm
- If you follow the instruction manual, you will be able to convert the battery to 12v. However, the Red and Blue WiringBullet Terminal that is attached to the battery is Male and the Red WiringBullet T...Đọc thêm
- Phù hợp:
- HONDA LITTLE CUB
- HONDA LEAD
- HONDA LIVEDio ZX
- HONDA MONKEY
- HONDA MOTRA
- ...và hơn thế nữa.
I use it on a honda xr 50 motard. Originally, I had an additional battery installed on the vehicle, but every time I didn't drive for a long time, the battery didn't have any power left, so I had to p...Đọc thêm - Phù hợp:
- HONDA MONKEY
I used it to convert the Zr-7S to Rear Sets.I had been wondering what to do with the OEM parts for the Rear Sets, but there was no mount for the brake switch.I considered getting a Hydraulic Switch, b...Đọc thêm - Phù hợp:
- HONDA CHALY 50
- HONDA DAX 6V
When the battery gets weak, the headlight and tail lamp, which are directly connected to the generator When the battery is weakened, the headlight and tail lamp, which are directly connected to the ge...Đọc thêm - Phù hợp:
- HONDA
I was satisfied with the appearance, but the blinker attachment part broke after 300km of installation. If you use the NORMAL or STANDARD type, you may need to reinforce it. The price is right, so thi...Đọc thêm - Phù hợp:
- HONDA
Bởi Andrey Pls (8)Купил этот замок зажигания взамен старому, т.к. у старого иногда отходил контакт при движение по неровностям, что приводило к тому, что отключались поворотники и дисплей. Сам замок подошел очень хорош...Đọc thêm - Phù hợp:
- HONDA NS50F NSF50
- HONDA APE 100
- HONDA APE 50
- HONDA GORILLA
- HONDA CHALY
- ...và hơn thế nữa.
Bởi Andrey Pls (8)Купил лампу желтого цвета попробовать как будет смотреть в отличие от белого света. Подошла отлично. Смотрится отлично и светит хорошо. Устанавливается как обычная лампа. Теперь стал выглядеть более р...Đọc thêm - Phù hợp:
- HONDA MONKEY
I used it for the Connector of the Tail part of MONKEY.When you don't want to cut the Harness, you can use a thin slotted screwdriver etc. to hold the nail and remove and replace the Plain Type Termin...Đọc thêm - Phù hợp:
- HONDA DAX ST50 early model 6V
It should be better than the wires of decades ago.Đọc thêm - [How is it used?I use it as a power on/off switch, not a kill switch.I don't put it on the Handlebar, but on the Φ22 extension bar from the Handlebar, and it sticks to it without turning.Was the insta...Đọc thêm
- Phù hợp:
- HONDA CT110 HUNTER CUBCT50 CL50
- HONDA CT110 HUNTER CUBCT110
You need to process the thickness to install it on the CD, otherwise the lock pawl on the back will not fit.It is a hard Material compared to OEM.Đọc thêm
CỬA HÀNG LỚN NHẤT
TẠI NHẬT BẢN
COUPON ĐẶC BIỆT,
GIẢM GIÁ, KHUYẾN MÃI
DỊCH VỤ GIAO HÀNG
NHANH, MIỄN PHÍ