Peyton Place Pô xe Peyton Place
It's much better than pure exhaust sound and feels like it's worthy of a reputation. Peyton is required for SR400. I recommend it.
 |  |  |
-
| Dung tích | 499 | Loại động cơ | 4-stroke/Air-cooled/SOHC/2 Valve |
| Công suất cực đại (ps) | 32ps(24kw)/6500rpm | Mômen xoắn cực đại (kgf/m) | 3.7kg・m(36N・m)/5500rpm |
| Trọng lượng thô của xe | 153 | Dung tích bình chứa nhiên liệu lít | 12 |
BORE ACE Bức xạ nhiệt Fin
In the picture, both the Heat Radiation Fin and the first tier have the BORE ACE Logo, but in reality, there is nothing and it looks cheap.I don't think it absorbs enough heat to feel the effect either.It seems a bit high in terms of Gold amount.
![BRISK RiskZC / ZSPlug [DR 14 ZC]](http://imgwebikenet-8743.kxcdn.com/photo/impression/65/65911f3f2414d6cb38d1b1192b716485M.jpg)
BRISK RiskZC / ZSPlug [DR 14 ZC]
There was a place of thinking, once removing the BRiskZC which was installed by the handling Shop, it decided to install JAPANPlug.[How is it used?Tandem's leisurely short touring is the main attraction.The only time I rev it to high is when I'm trying to get out of a crowd of cars. It runs quietly ...
HURRICANE Ghi đông thép Flat Continental 4 Φ7/8 in...
[How is it used?I wanted to replace the Grip and Bar End while I was doing the Lever replacement, so I replaced the Handlebar too!Was the one you received as per Image?While slightly lower than OEM, nothing wrong with that!Was the installation difficult?Although the Handlebar itself is not difficult...
Vesrah Tấm đệm bằng kim loại Pads phanh
I put it on my 83SR500.I felt that the front brake of the OEM setting was not working well.It doesn't even seem to lock up at all when I grip it.In order to increase the effective pad area, it is necessary to customize the Rotor&Caliper, so I was wondering how much I can get back the braking feeling...
YAMAHA Bạt trùm xe kiểu E
I think I used it for over 5 years and it finally tore.It lasts a long time and I have no complaints, so I bought the same product. All the Motorcycle Covers I use are now Yamaha's.This time I bought it again for Motocrosser, and it is a car without Mirror, but there is nothing to be concerned about...
YAMAHA Bạt trùm xe kiểu E
It is a motorcycle cover of Y's Gear, and I use it while replacing it for more than 10 years.There are many inexpensive motorcycle covers, but this Y's Gear motorcycle cover is cheap because it will last for more than 4 or 5 years.Thanks to this, the exterior of the Scooter is still Polished after s...
DAYTONA Hoài niệm
I installed it on SR400 FileEdition.I can't complain about the look, Parenthesis is great!There is not a step, and the footing becomes better because it becomes Slim a little while maintaining OEM Style.However, it feels stiff when replacing from OEM.At first, I thought I made a little mistake with ...
HURRICANE Ghi đông thép BM Continental 2 Φ7/8 inch
Replaced the Handlebar width to make it narrower for the VANVAN200 Custom.The Image is approximately half a fist inside and one handful down from OEM.As a result, it is easy to slip through and I am generally satisfied with the compactness of the Handlebar area.The quality of the Handlebar is also p...
(0.0)
?
CỬA HÀNG LỚN NHẤT
TẠI NHẬT BẢN
COUPON ĐẶC BIỆT,
GIẢM GIÁ, KHUYẾN MÃI
DỊCH VỤ GIAO HÀNG
NHANH, MIỄN PHÍ