CHERRY Thương hiệu mới CV Bộ chế hòa khí nổi
I bought this because I'm overhauling my friend's carburetor and although it's not OEM, I can install it without any problems and there are no leaks. The price is very reasonable.
 |  |  |
-
| Dung tích | 1164 | Loại động cơ | Water-cooled/4-stroke/Parallel 4-cylinder/DOHC/4 Valve |
| Công suất cực đại (ps) | 95ps(70kw)/7500rpm | Mômen xoắn cực đại (kgf/m) | 10.3kg・m(101N・m)/3500rpm |
| Trọng lượng thô của xe | 224 | Dung tích bình chứa nhiên liệu lít | 18 |
![Hirayama Industry Xe đạp bánh bao trái phiếu [KIZUNA]](http://imgwebikenet-8743.kxcdn.com/photo/impression/f5/f54516443d5fe9db068b2039c51d1100M.jpg)
Hirayama Industry Xe đạp bánh bao trái phiếu [KIZU...
Used on VFR800(1999). There is no sticking point and the Size is just right.It's thick and has a good texture, and it's a little expensive, but I'm satisfied.The holes for the lock are colored differently in the front and back, which is convenient for hanging the Cover without mistaking the front an...
K-FACTORY Ốp bảo vệ phuộc trước
It's not a very good build.If it is not done properly, the Outer tube may be scratched during installation.But! It's not available from any other manufacturer, so I had no choice but to…install it carefully.
DAYTONA Bộ lọc thay thế được tích hợp sẵn (Dòng sả...
I've tried OEM, Other Brand Product, and many other products, and I have no complaints about this product, and it's also cosmetically very good.The installation was no problem at all and they seem to be doing a great job of being the star of the shade.If in doubt, there is no harm in choosing it.
K-FACTORY Ống xả CLR-R
In the event that you've got a little bit of knowledge and tools, you'll be able to make the most of it.
SNIPER Phanh đòn bẩy bảo vệ
I don't plan to run Circuit, but I wanted to make it look like Race ish, so I bought this.It was easy for me as a custom beginner to remove and replace one bolt.However, Bolt was very hard and Large was strange!
DAYTONA Ốc thông hơi heo dầu
It's a little bit expensive, but I think it's not a bad idea to change it because it's a part where corrosion is a concern. It is my personal impression that the dress-up effect is not so hopeful to be honest.I bought it more for corrosion protection, so I'm happy with it.
YAMAHA Bạt trùm xe kiểu E
I think I used it for over 5 years and it finally tore.It lasts a long time and I have no complaints, so I bought the same product. All the Motorcycle Covers I use are now Yamaha's.This time I bought it again for Motocrosser, and it is a car without Mirror, but there is nothing to be concerned about...
ZETA Tay thắng ZETA
I bought it because the brake lever part number is the same for 1000 (XT) and 1050 (1050XT is different, but probably only the lever color is different). As I thought, I just put it on and no problem with brake and brake switch operation.One point, please note that it is about one finger shorter tha...
ZETA Titanium Brake Disc Bolt
[How is it used?Since I changed the brake disc, I changed the bolt as well and went to Titaniumium Bolt!Was the one you received as per Image?It was a Titanium Bolt. Of course, lol.Was the installation difficult?The OEMBolt is removed for replacement.You need to be careful when you remove it because...
(0.0)
?
CỬA HÀNG LỚN NHẤT
TẠI NHẬT BẢN
COUPON ĐẶC BIỆT,
GIẢM GIÁ, KHUYẾN MÃI
DỊCH VỤ GIAO HÀNG
NHANH, MIỄN PHÍ