- Phù hợp:
- HONDA MSX GROM (MLHJC92)
- HONDA MSX125 (MLHC618_D5000001 or later)
- HONDA DAX125 JB04 (JB04-1000001 or later)
- HONDA MONKEY125 (JB03-1000001-)
- HONDA MONKEY125 (JB02-1000001 or later)
- ...và hơn thế nữa.
About quality and texture, I can confirm that the quality is great and that the material used is aluminum tubing with a black anodized finish. About the feeling of use, These handle bars are light in ...Đọc thêm - Phù hợp:
- HONDA MSX GROM (MLHJC92)
- HONDA MSX125 (MLHC618_D5000001 or later)
- HONDA DAX125 JB04 (JB04-1000001 or later)
- HONDA MONKEY125 (JB03-1000001-)
- HONDA MONKEY125 (JB02-1000001 or later)
- ...và hơn thế nữa.
About quality and texture - Top quality. Light weight aluminium handlebars with a nice silver paint that suits the original styling of the Monkey.
About the feeling of use - Not a massive difference ...Đọc thêm - Phù hợp:
- HONDA glom 13-15 JC61 (up to 1300000)(60mm down 95mm forward)
- HONDA glom 16-17 JC61 (1300001)(40mm down 65mm forward)
Installed on a Monkey 125, which leans forward a lot compared to the OEM.The mounting holes are open for easy replacement, and the wires are large and sturdy as OEM, although there is some excess.Đọc thêm - Phù hợp:
- HONDA GROM 16-17
Installed on a 2014 JC61 NORMAL. I wanted to replace it with a lower Handlebar.I'm 6'3" and the NORMAL feels too tight for me, so I was looking for a Handlebar that was lower and farther away, and I f...Đọc thêm - Phù hợp:
- HONDA glom 13-15 JC61 (up to 1300000)(60mm down 95mm forward)
- HONDA glom 16-17 JC61 (1300001)(40mm down 65mm forward)
No drilling is required as it is specially designed for Grom.Without the Handlebar Stopper, it will interfere with the Cowl.Position is leaning forward and I'm happy with it.Đọc thêm - Phù hợp:
- HONDA glom EBJ-JC61
Motorcycle is easier to handle and Corner is easier.Đọc thêm - Phù hợp:
- HONDA glom 13-15 JC61 (up to 1300000)(60mm down 95mm forward)
- HONDA glom 16-17 JC61 (1300001)(40mm down 65mm forward)
This is for the Grom, so the Monkey 125 is not a compatible model, but I was able to install it without any problems.However, because cables are inevitably too much, the handling and adjustment are a ...Đọc thêm - Phù hợp:
- HONDA glom 13-15 JC61 (up to 1300000)(60mm down 95mm forward)
- HONDA glom 16-17 JC61 (1300001)(40mm down 65mm forward)
Pre-drilled holes for pumpingAnd for all the Machines we've seen so far.Go ahead and use the black paint.I'm feeling a little weak.I chose Black again this time.Handlebar position has been changed.The...Đọc thêm - Phù hợp:
- HONDA glom 13-15 JC61 (up to 1300000)(60mm down 95mm forward)
- HONDA glom 16-17 JC61 (1300001)(40mm down 65mm forward)
I was worried about the manufacturer and the shape, etc., when I replaced it, butI ended up going with this one because I thought it would be a classic and a sure thingLarge It was correct (・ω・)...Đọc thêm - Phù hợp:
- HONDA GROM 16- *For race base cars only
- HONDA GROM 21- *For race base cars only
The Riding Position makes it easier to get down and I like it a lotThe brake hose will interfere with the meter case during installationYou might want to think about handling it a little bitĐọc thêm - Phù hợp:
- HONDA glom EBJ-JC61
What made you decide to buy? I was looking for a low, slightly narrow HandlebarHow was your experience with it? I used the HURRICANE 25mm Up Spacer because it was a little too lowWas the installation ...Đọc thêm - Phù hợp:
- HONDA glom 13-15 JC61 (up to 1300000)(60mm down 95mm forward)
- HONDA glom 16-17 JC61 (1300001)(40mm down 65mm forward)
This is the standard handlebar for circuit use I'm used to riding a motorcycle and I feel very comfortable with itInstallation and accuracyIt takes some care in handling the brake hose and wire The Ax...Đọc thêm - Phù hợp:
- HONDA glom (JC61-1000001-) GROM(JC61-13000001-) MSX125(MLHJC618-D5000001-) MSX125SF
I used to use the Takekawa Handlebar, which is 4?lower than the OEMThere was a spec. change for a lower type of Takekawa Grom, so I had to change the specI replaced itThe feel is more in the foregroun...Đọc thêm - Phù hợp:
- HONDA GROM MSX125
Since the width of OEM's Handlebar was wide and it felt distant, I diverted it for GROM, narrowed the width and brought it slightly.When attaching the Handlebar weight, attention is necessary sinc...Đọc thêm - Phù hợp:
- HONDA MSX GROM (MLHJC92)
- HONDA MSX125 (MLHC618_D5000001 or later)
- HONDA DAX125 JB04 (JB04-1000001 or later)
- HONDA MONKEY125 (JB03-1000001-)
- HONDA MONKEY125 (JB02-1000001 or later)
- ...và hơn thế nữa.
【What made you decide the purchase?】 RequiredBecause it is unnecessary to exchange Cable class at 4 cm DOWN like looking OEM【How was it actually used?】 RequiredIt can be loaded and distributed to Hand...Đọc thêm - Phù hợp:
- HONDA glom 13-15 JC61 (up to 1300000)(60mm down 95mm forward)
- HONDA glom 16-17 JC61 (1300001)(40mm down 65mm forward)
Although looks are not very good, Position is very goodI bought Black, but paint is cheap and scratches are easy to get, so Silver may be betterWire kind think that it is just right to adjust 5 mm Sho...Đọc thêm
CỬA HÀNG LỚN NHẤT
TẠI NHẬT BẢN
COUPON ĐẶC BIỆT,
GIẢM GIÁ, KHUYẾN MÃI
DỊCH VỤ GIAO HÀNG
NHANH, MIỄN PHÍ